Change Transmission Expedition but Car Doesn’t Move

Symptoms

If you’ve recently changed the transmission in your Ford Expedition and now the car doesn’t move, there are a few possible causes:

• The transmission may not be properly installed.
• The torque converter may not be properly seated.
• The driveshaft may not be properly connected.
• The transmission fluid may be low.
• There may be a problem with the electrical system.

Diagnosis

To diagnose the problem, you’ll need to inspect the transmission, torque converter, driveshaft, and transmission fluid. You’ll also need to check the electrical system for any problems.

Here are some specific things to look for:

• Make sure that the transmission is properly bolted into place.
• Check the torque converter to make sure that it is properly seated on the transmission.
• Inspect the driveshaft to make sure that it is properly connected to the transmission and rear axle.
• Check the transmission fluid level and condition.
• Inspect the electrical system for any loose or damaged wires.

Repair

Once you’ve diagnosed the problem, you can begin to repair it.

Here are some specific repair procedures:

• If the transmission is not properly installed, you’ll need to remove it and reinstall it correctly.
• If the torque converter is not properly seated, you’ll need to remove it and reinstall it correctly.
• If the driveshaft is not properly connected, you’ll need to remove it and reconnect it correctly.
• If the transmission fluid is low, you’ll need to add more fluid.
• If there is a problem with the electrical system, you’ll need to repair or replace the damaged wires.

Prevention

To prevent this problem from happening again, you should:

• Make sure that the transmission is properly installed.
• Check the torque converter to make sure that it is properly seated.
• Inspect the driveshaft to make sure that it is properly connected.
• Check the transmission fluid level and condition regularly.
• Inspect the electrical system for any loose or damaged wires regularly.

Conclusion

If your Ford Expedition doesn’t move after you’ve changed the transmission, there are a few possible causes. By following the steps in this article, you can diagnose and repair the problem so that your car is back on the road again.