City Car Driving Automatic Transmission Not Working

What is City Car Driving?

City Car Driving is a realistic driving simulator that allows players to experience the challenges of driving in a city environment. The game features a variety of different vehicles, including cars, buses, and trucks, as well as a variety of different environments, including city streets, highways, and parking lots.

How to Fix an Automatic Transmission in City Car Driving

If you are experiencing problems with the automatic transmission in City Car Driving, there are a few things you can try to fix the problem.

1. Check the fluid level

The first thing you should do is check the fluid level in the transmission. If the fluid level is low, it can cause the transmission to slip or not engage properly. To check the fluid level, follow these steps:

1. Park the car on a level surface.
2. Turn off the engine.
3. Open the hood.
4. Locate the transmission dipstick.
5. Pull out the dipstick and wipe it clean.
6. Reinsert the dipstick into the transmission.
7. Pull out the dipstick again and check the fluid level.

The fluid level should be between the “min” and “max” marks on the dipstick. If the fluid level is low, add more fluid until it reaches the “max” mark.

2. Check the shift solenoid

The shift solenoid is responsible for shifting the transmission into different gears. If the shift solenoid is faulty, it can cause the transmission to slip or not engage properly. To check the shift solenoid, follow these steps:

1. Disconnect the negative battery terminal.
2. Locate the shift solenoid.
3. Unplug the electrical connector from the shift solenoid.
4. Use a multimeter to test the shift solenoid for continuity. If there is no continuity, the shift solenoid is faulty and needs to be replaced.

3. Check the transmission filter

The transmission filter helps to keep the transmission fluid clean. If the transmission filter is dirty, it can restrict the flow of fluid and cause the transmission to slip or not engage properly. To check the transmission filter, follow these steps:

1. Park the car on a level surface.
2. Turn off the engine.
3. Open the hood.
4. Locate the transmission filter.
5. Unbolt the transmission filter and remove it from the transmission.
6. Inspect the transmission filter for dirt and debris. If the filter is dirty, it needs to be replaced.

4. Replace the transmission fluid

If you have checked all of the above items and the transmission is still not working properly, you may need to replace the transmission fluid. To replace the transmission fluid, follow these steps:

1. Park the car on a level surface.
2. Turn off the engine.
3. Open the hood.
4. Locate the transmission drain plug.
5. Place a drain pan under the transmission drain plug.
6. Unscrew the transmission drain plug and allow the fluid to drain out.
7. Once the fluid has drained out, replace the transmission drain plug.
8. Locate the transmission fill plug.
9. Unscrew the transmission fill plug and add new transmission fluid until it reaches the “max” mark on the dipstick.

Conclusion

If you are experiencing problems with the automatic transmission in City Car Driving, there are a few things you can try to fix the problem. By following the steps in this guide, you should be able to get your transmission working properly again.