Club Car Precedent Body Removal

Tools and Materials

• 10mm socket wrench
• 13mm socket wrench
• Phillips head screwdriver
• Flathead screwdriver
• Pry bar
• Safety glasses
• Gloves

Safety Precautions

• Wear safety glasses and gloves when working on your Club Car Precedent.
• Disconnect the battery before beginning any work.
• Be careful not to damage any of the electrical wires or components.
• If you are not comfortable performing this task, please consult a qualified mechanic.

Step-by-Step Instructions

1. Remove the Seat

1. Locate the two bolts at the rear of the seat.
2. Use a 13mm socket wrench to remove the bolts.
3. Lift the seat up and off the frame.

2. Remove the Front Cowl

1. Locate the two screws at the top of the front cowl.
2. Use a Phillips head screwdriver to remove the screws.
3. Lift the front cowl up and off the frame.

3. Remove the Rear Cowl

1. Locate the two screws at the bottom of the rear cowl.
2. Use a Phillips head screwdriver to remove the screws.
3. Lift the rear cowl up and off the frame.

4. Remove the Side Panels

1. Locate the two screws at the top of each side panel.
2. Use a Phillips head screwdriver to remove the screws.
3. Lift the side panels up and off the frame.

5. Disconnect the Electrical Connectors

1. Locate the electrical connectors on the inside of the body panels.
2. Use a flathead screwdriver to disconnect the connectors.

6. Remove the Body Panels

1. Grip the body panels on both sides.
2. Pull the body panels straight up and off the frame.

Reinstallation

To reinstall the body panels, simply reverse the steps above.

Tips

• It is helpful to have a friend or family member assist you with this task.
• Take your time and be careful not to damage any of the components.
• If you have any questions, please consult a qualified mechanic.