Converting Car to Manual Transmission 60’s

Introduction

Converting a car from an automatic transmission to a manual transmission is a major undertaking, but it can be a rewarding experience for those who are willing to put in the time and effort. While it is possible to convert any car to a manual transmission, it is important to note that some cars are more difficult to convert than others. Classic cars, in particular, can be challenging to convert due to their unique designs and limited availability of parts.

If you are considering converting your car to a manual transmission, it is important to do your research and choose a car that is relatively easy to convert. You should also factor in the cost of the conversion, which can range from $2,000 to $5,000. In this article, we will provide you with a step-by-step guide on how to convert a car to a manual transmission.

Step 1: Gather the Necessary Parts

The first step in converting your car to a manual transmission is to gather the necessary parts. This includes the following:

• Manual transmission
• Clutch
• Flywheel
• Driveshaft
• Rear differential
• Shifter
• Pedals
• Electrical components

You can find these parts at a junkyard, online, or from a specialty parts supplier. It is important to make sure that all of the parts are compatible with your car.

Step 2: Remove the Automatic Transmission

Once you have gathered all of the necessary parts, you can begin removing the automatic transmission. This is a complex process that requires you to disconnect the transmission from the engine, driveshaft, and rear differential. You will also need to remove the electrical components that are connected to the transmission.

Once the transmission is removed, you can install the manual transmission. This process is similar to the removal process, but in reverse. You will need to connect the transmission to the engine, driveshaft, and rear differential. You will also need to install the electrical components that are connected to the transmission.

Step 3: Install the Clutch

Once the transmission is installed, you can install the clutch. The clutch is a friction device that allows you to engage and disengage the transmission. It is important to make sure that the clutch is properly adjusted.

Step 4: Install the Flywheel

The flywheel is a heavy metal disk that is attached to the crankshaft of the engine. It stores energy and helps to smooth out the engine’s operation. The flywheel must be installed before you can install the clutch.

Step 5: Install the Driveshaft

The driveshaft is a metal tube that connects the transmission to the rear differential. The driveshaft must be installed before you can install the rear differential.

Step 6: Install the Rear Differential

The rear differential is a mechanical device that allows the wheels to turn at different speeds. The rear differential must be installed before you can install the wheels.

Step 7: Install the Shifter

The shifter is a lever that allows you to change gears. The shifter must be installed before you can connect the transmission to the pedals.

Step 8: Install the Pedals

The pedals are the devices that you use to operate the clutch and brake. The pedals must be installed before you can connect the transmission to the pedals.

Step 9: Connect the Electrical Components

The electrical components that are connected to the transmission include the starter solenoid, the reverse lights switch, and the neutral safety switch. These components must be connected before you can start the car.

Step 10: Start the Car

Once you have connected all of the electrical components, you can start the car. The car will not be able to move until you depress the clutch pedal.

Conclusion

Converting a car to a manual transmission is a complex process, but it is possible to do it yourself. If you are willing to put in the time and effort, you can save a significant amount of money and enjoy the benefits of driving a manual transmission car.