Custom Paint RC Car Bodies: Carbon Fiber

Carbon fiber is a popular material for RC car bodies because it is lightweight and strong. It is also relatively easy to paint, making it a great option for customizers. Here is a guide to painting carbon fiber RC car bodies:

Materials

• Carbon fiber RC car body
• Sandpaper (120-grit, 220-grit, 400-grit)
• Tack cloth
• Primer
• Paint
• Clear coat

Instructions

1. Sand the carbon fiber body with 120-grit sandpaper to remove any imperfections. Be sure to sand in the direction of the grain.
2. Wipe the body down with a tack cloth to remove any dust or debris.
3. Apply a thin coat of primer to the body. Allow the primer to dry completely before sanding with 220-grit sandpaper.
4. Wipe the body down with a tack cloth again.
5. Apply two or three thin coats of paint to the body. Allow each coat to dry completely before sanding with 400-grit sandpaper.
6. Wipe the body down with a tack cloth one last time.
7. Apply a clear coat to the body. Allow the clear coat to dry completely before handling.

Tips

• Use a light touch when sanding the carbon fiber body. Too much pressure can damage the material.
• Be sure to wear a dust mask when sanding.
• Allow the paint and clear coat to dry completely before handling to avoid smudging or scratching.
• Experiment with different colors and finishes to create a custom look.

Conclusion

Painting carbon fiber RC car bodies is a relatively easy process that can be completed in a few hours. With a little care and attention to detail, you can create a custom body that will make your car stand out from the crowd.