How to Activate Bath and Body Works Car Scent

1. Remove the plastic wrap from the scent cartridge.

The scent cartridge is the small, round object that is packaged inside the car scent holder. To remove the plastic wrap, simply peel it off of the cartridge.

2. Insert the scent cartridge into the car scent holder.

The car scent holder is the plastic or metal device that is attached to your car’s air vent. To insert the scent cartridge, simply push it into the holder until it clicks into place.

3. Turn on the air vent.

Once the scent cartridge is inserted into the holder, turn on the air vent to start releasing the scent.

4. Adjust the intensity of the scent.

Most car scent holders have a dial or lever that allows you to adjust the intensity of the scent. If you find that the scent is too strong, simply turn the dial or lever down.

5. Replace the scent cartridge when it is empty.

The scent cartridge will typically last for several weeks, but it will eventually need to be replaced. To replace the cartridge, simply pull it out of the holder and insert a new one.

Tips for Activating Bath and Body Works Car Scent

• For best results, use a new scent cartridge every time you activate the car scent holder.
• Do not overfill the car scent holder with fragrance oil. This can cause the scent to be too strong or overpowering.
• Keep the car scent holder clean. Dust and dirt can clog the holder and prevent the scent from being released properly.
• If you are not satisfied with the intensity of the scent, try adjusting the dial or lever on the car scent holder.
• If you have any questions about how to activate Bath and Body Works car scent, please consult the product instructions.

Troubleshooting Bath and Body Works Car Scent

• The scent is too weak. This could be due to a number of factors, including:
  • The scent cartridge is old or empty.
  • The car scent holder is not clean.
  • The air vent is not turned on.
  • The scent cartridge is not inserted correctly into the holder.
• The scent is too strong. This could be due to a number of factors, including:
  • The scent cartridge is new.
  • The car scent holder is overfilled with fragrance oil.
  • The air vent is turned up too high.
• The scent is not being released. This could be due to a number of factors, including:
  • The scent cartridge is not inserted correctly into the holder.
  • The car scent holder is clogged with dust or dirt.
  • The air vent is not turned on.

If you are experiencing any of these problems, please try the following troubleshooting tips:

• Replace the scent cartridge with a new one.
• Clean the car scent holder with a damp cloth.
• Turn on the air vent.
• Insert the scent cartridge correctly into the holder.
• Adjust the dial or lever on the car scent holder to adjust the intensity of the scent.

If you have tried all of these troubleshooting tips and the problem persists, please contact Bath and Body Works customer service.