How to Attach an RC Car Body
Introduction
RC car bodies are made of a variety of materials, including lexan, polycarbonate, and fiberglass. They are designed to protect the car’s chassis and components from damage, and they can also improve the car’s performance. However, attaching an RC car body can be a bit tricky, especially if you’ve never done it before.
In this article, we will provide you with step-by-step instructions on how to attach an RC car body. We will also provide you with some tips on how to make the process easier.
Materials You Will Need
Before you begin, you will need to gather the following materials:
* An RC car body
* A chassis
* Body mounts
* Screws
* A screwdriver
* A hobby knife
* A pair of scissors
Step-by-Step Instructions
1. Prepare the chassis. Before you can attach the body, you need to prepare the chassis. This involves removing any old body mounts or hardware, and cleaning the surface of the chassis.
2. Mount the body mounts. Once the chassis is prepared, you can mount the body mounts. Body mounts are typically made of plastic or metal, and they are used to secure the body to the chassis. There are a variety of different types of body mounts available, so be sure to choose the ones that are compatible with your car.
3. Attach the body. Once the body mounts are in place, you can attach the body. Start by aligning the body with the chassis. Then, carefully push the body down onto the body mounts. You may need to use a screwdriver to tighten the screws that secure the body to the chassis.
4. Trim the body. Once the body is attached, you may need to trim it to fit. Use a hobby knife or a pair of scissors to trim away any excess material.
5. Paint the body. Once the body is trimmed, you can paint it. There are a variety of different types of paint that you can use, so be sure to choose one that is compatible with the material of your body.
Tips
* If you are having trouble attaching the body, try using a hair dryer to soften the material. This will make it easier to push the body down onto the body mounts.
* If you are using a lexan body, be sure to use lexan paint. Lexan paint is specially formulated to adhere to lexan material.
* If you are painting the body, be sure to apply several thin coats of paint. This will help to prevent the paint from peeling or chipping.
* Once the paint is dry, you can apply a clear coat to protect the finish.
Conclusion
Attaching an RC car body is not a difficult task, but it does require a bit of patience and care. By following the instructions in this article, you can easily attach an RC car body to your car.
