How to Change a Car from Automatic to Manual Transmission

Introduction

Changing a car from automatic to manual transmission is a complex and time-consuming process, but it can be done with the right tools and knowledge. This guide will walk you through the steps of how to change a car from automatic to manual transmission.

Tools and Materials

Before you begin, you will need to gather the following tools and materials:

• New manual transmission
• Clutch kit
• Flywheel
• Driveshaft
Shifter
• Slave cylinder
• Master cylinder
• Brake fluid
• Transmission fluid
• Jack and jack stands
• Sockets and wrenches
• Screwdriver
• Allen key

Step-by-Step Instructions

Once you have gathered the necessary tools and materials, you can begin the process of changing a car from automatic to manual transmission. Follow these steps carefully:

1. Remove the Automatic Transmission

1. Raise the car on jack stands.
2. Disconnect the battery.
3. Drain the transmission fluid.
4. Remove the driveshaft.
5. Unbolt the transmission mount.
6. Lower the transmission and remove it from the car.

2. Install the Manual Transmission

1. Place the new manual transmission into the car.
2. Bolt the transmission mount.
3. Insert the driveshaft.
4. Fill the transmission with fluid.
5. Reconnect the battery.

3. Install the Clutch Kit

1. Remove the old clutch kit.
2. Install the new clutch kit.
3. Adjust the clutch pedal.

4. Install the Flywheel

1. Remove the old flywheel.
2. Install the new flywheel.
3. Torque the flywheel bolts to the specified torque.

5. Install the Shifter

1. Remove the old shifter.
2. Install the new shifter.
3. Adjust the shifter linkage.

6. Install the Slave Cylinder

1. Remove the old slave cylinder.
2. Install the new slave cylinder.
3. Bleed the clutch system.

7. Install the Master Cylinder

1. Remove the old master cylinder.
2. Install the new master cylinder.
3. Fill the brake fluid reservoir
4. Bleed the brake system.

8. Start the Car and Test Drive

1. Start the car and let it idle for a few minutes.
2. Shift the car into gear and drive it around the block.
3. Check for any leaks or problems.

Conclusion

Changing a car from automatic to manual transmission is a challenging task, but it can be done with the right tools and knowledge. By following the steps outlined in this guide, you can successfully change your car’s transmission and enjoy the benefits of manual driving.