How to Derust Entire Car Body

Introduction

Rust is a common problem for cars, especially if they are exposed to the elements. Rust can cause unsightly damage and even lead to structural problems. If you have a rusty car, you can derust it yourself with a little time and effort.

Materials You Will Need

* Wire brush
* Sandpaper (various grits)
* Rust remover
* Primer
* Paint
* Clear coat

Steps

1. Wash the car thoroughly. This will help to remove any dirt and grime that could interfere with the derusting process.
2. Dry the car completely. This is important to ensure that the rust remover will be able to penetrate the metal.
3. Use a wire brush to remove any loose rust. This will help to expose the bare metal so that the rust remover can work effectively.
4. Sand the rusty areas with sandpaper. Start with a coarse grit sandpaper and work your way down to a fine grit sandpaper. This will help to smooth the surface and remove any remaining rust.
5. Apply the rust remover to the rusty areas. Follow the directions on the product label.
6. Let the rust remover sit for the recommended amount of time. This will give the rust remover time to penetrate the metal and dissolve the rust.
7. Rinse the rust remover off with water. Be sure to rinse thoroughly to remove all of the rust remover.
8. Dry the car completely. This is important to ensure that the primer will be able to adhere to the metal.
9. Apply primer to the rusty areas. Follow the directions on the product label.
10. Let the primer dry completely. This is important to ensure that the paint will be able to adhere to the primer.
11. Paint the rusty areas. Follow the directions on the product label.
12. Let the paint dry completely. This is important to ensure that the clear coat will be able to adhere to the paint.
13. Apply clear coat to the rusty areas. Follow the directions on the product label.

Tips

* If the rust is severe, you may need to repeat the derusting process several times.
* Be sure to wear gloves and eye protection when using rust remover.
* If you are not comfortable doing the derusting process yourself, you can take your car to a professional mechanic.

Conclusion

Derusting your car is a relatively simple process that can be done with a little time and effort. By following the steps outlined in this article, you can restore your car to its former glory.