How to Do a Wide Body Modification on Cars
Introduction
A wide body modification is a popular way to give your car a more aggressive and sporty look. It involves widening the fenders and quarter panels of your car to accommodate wider tires and wheels. This can improve your car’s handling and performance, as well as its appearance. There are a few different ways to do a wide body modification, but the most common method is to use fiberglass fender flares. This guide will show you how to do a wide body modification using this method.
Materials and Tools
Before you begin, you will need to gather the following materials and tools:
- Fiberglass fender flares
- Resin and hardener
- Fiberglass mat
- Sandpaper
- Bondo
- Primer
- Paint
- Angle grinder
- Drill
- Screws
- Measuring tape
- Safety glasses
- Respirator
Step 1: Prepare the Car
The first step is to prepare your car for the modification. This involves removing the old fenders and quarter panels. You will also need to remove any other parts that will interfere with the installation of the new fender flares, such as the bumpers and headlights. Once the car is prepared, you can begin the installation process.
Step 2: Install the Fender Flares
The next step is to install the new fender flares. Align the flares with the fenders and quarter panels, and then secure them using screws. The screws will not be visible once the installation is complete.
Step 3: Reinforce the Fender Flares
Once the fender flares are installed, you will need to reinforce them with fiberglass. This is done by applying resin and fiberglass mat to the inside of the flares. The fiberglass will help to strengthen the flares and prevent them from cracking or breaking. Allow the fiberglass to cure completely before moving on to the next step.
Step 4: Sand and Fill
Once the fiberglass has cured, you will need to sand the fender flares and fill any imperfections with Bondo. This will help to create a smooth and even surface. Once the Bondo has cured, you can sand it again to smooth it out. The fenders should now be ready to prime and paint.
Step 5: Prime and Paint
The final step is to prime and paint the fender flares. Apply several coats of primer to the flares and allow them to dry completely. Once the primer is dry, you can apply several coats of paint. Allow the paint to dry completely before installing the fender flares on the car. The wide body modification should now be complete and your car should have a new and aggressive look.
Tips
- Take your time and do the job right. A wide body modification is a complex process that requires precision. Don’t rush through the steps and make sure that everything is done correctly.
- Use quality materials. The materials that you use will affect the final result of your modification. Don’t cut corners and use the best materials that you can afford.
- Be prepared to spend some money. A wide body modification can be expensive, so be prepared to spend a few thousand dollars on the project.
- Get help if you need it. If you are not experienced in working with fiberglass, it is best to get help from a professional. A professional can help you to avoid mistakes and ensure that the job is done right.
Conclusion
A wide body modification is a great way to give your car a more aggressive and sporty look. By following the steps in this guide, you can do the modification yourself and save money. Just remember to take your time and do the job right, and you will be happy with the results.
