How to Fix Rust on Car Body with Blaster
Materials You’ll Need
- Blaster
- Wire brush
- Sandpaper
- Primer
- Paint
Step-by-Step Instructions
1. Prepare the surface
Start by cleaning the rusty area with a wire brush to remove any loose rust. Then, sand the area with sandpaper to smooth it out. Finally, wipe down the area with a clean cloth to remove any dust or debris.
2. Apply the blaster
Follow the manufacturer’s instructions for applying the blaster. Typically, you’ll need to shake the can well and then hold it about 6 inches from the rusty area. Spray the blaster in a back-and-forth motion, making sure to cover the entire area. Allow the blaster to dry for the amount of time specified by the manufacturer.
3. Sand the area again
Once the blaster has dried, sand the area again to smooth it out. This will help to ensure that the primer and paint adhere properly.
4. Apply primer
Apply a coat of primer to the rusty area. This will help to protect the metal from further rusting and will also provide a good base for the paint.
5. Paint the area
Finally, apply a coat of paint to the rusty area. Make sure to use a paint that is specifically designed for automotive use.
Tips
- If the rusty area is large, you may need to apply multiple coats of blaster and paint.
- Be sure to allow each coat to dry completely before applying the next coat.
- To prevent rust from forming in the future, wax your car regularly.
Conclusion
Rust is a common problem for cars, but it can be easily fixed with the right tools and materials. By following the steps outlined in this article, you can fix rust on your car body and restore its appearance.
