How to Fix Small Holes in Car Body
Introduction
Small holes in your car’s body can be a nuisance, and if left untreated, they can lead to rust and other problems. Fortunately, there are a few simple steps you can take to fix small holes in your car’s body yourself.
Materials you need
- Sandpaper
- Bondo filler
- Putty knife
- Primer
- Paint
- Clear coat
Step 1: Prepare the area
Start by cleaning the area around the hole with soap and water. Once the area is clean, sand it lightly with sandpaper to create a smooth surface for the Bondo filler to adhere to.
Step 2: Apply Bondo filler
Use a putty knife to apply a thin layer of Bondo filler to the hole. Smooth the filler out with the putty knife, making sure to fill the hole completely. Allow the filler to dry according to the manufacturer’s instructions.
Step 3: Sand the filler
Once the filler is dry, sand it smooth with sandpaper. Start with a coarse sandpaper and gradually move to a finer sandpaper until the filler is flush with the surrounding surface.
Step 4: Prime the area
Apply a thin layer of primer to the repaired area. Primer will help to protect the filler from rust and will provide a smooth surface for the paint to adhere to.
Step 5: Paint the area
Once the primer is dry, apply a thin layer of paint to the repaired area. Use a brush or spray paint, and make sure to apply the paint evenly. Allow the paint to dry according to the manufacturer’s instructions.
Step 6: Clear coat the area
Once the paint is dry, apply a clear coat to the repaired area. Clear coat will help to protect the paint from scratches and fading.
Conclusion
Fixing small holes in your car’s body is a simple and inexpensive repair that you can do yourself. By following the steps outlined in this article, you can save yourself time and money while keeping your car looking its best.
