How to flat tow a car with automatic transmission




How to Flat Tow a Car with Automatic Transmission

How to Flat Tow a Car with Automatic Transmission

Flat towing a car with an automatic transmission can be a daunting task, but it’s not impossible. With the right tools and a little know-how, you can safely tow your automatic car behind another vehicle.

Before You Start

Before you start flat towing your car, there are a few things you need to do:

  • Check your owner’s manual. This is the best place to find out if your car can be flat towed. Some automatic transmissions can be flat towed, while others cannot.
  • Disconnect the battery. This will prevent any electrical damage to your car.
  • Put the car in neutral. This will allow the wheels to turn freely.
  • Release the parking brake. This will allow the car to roll freely.

Attaching the Tow Bar

Once your car is prepared, you need to attach the tow bar. A tow bar is a device that connects your car to the towing vehicle. It’s important to use a tow bar that is specifically designed for your car.

To attach the tow bar, follow these steps:

  1. Position the tow bar on the front of your car.
  2. Align the tow bar with the mounting points on your car.
  3. Insert the bolts into the mounting points and tighten them.
  4. Connect the safety chains to the towing vehicle.

Towing Your Car

Once the tow bar is attached, you’re ready to start towing your car. Follow these tips for safe towing:

  • Drive slowly. The speed limit for towing is usually lower than the speed limit for normal driving.
  • Be aware of your surroundings. Make sure you have enough room to maneuver and stop.
  • Avoid sudden stops and starts. This can put stress on the tow bar and your car.
  • Take breaks every few hours. This will give you a chance to check on your car and the tow bar.

Unhooking the Tow Bar

Once you’ve reached your destination, you need to unhook the tow bar. To do this, follow these steps:

  1. Park the towing vehicle on a level surface.
  2. Put the car in park.
  3. Release the safety chains.
  4. Disconnect the tow bar from the towing vehicle.
  5. Remove the bolts from the mounting points on your car.
  6. Store the tow bar in a safe place.

Conclusion

Flat towing a car with an automatic transmission can be a safe and easy process. By following these tips, you can avoid any problems and get your car to its destination safely.


Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: