How to Get a Car Body Furnace in Mad Max
Introduction
In the harsh and unforgiving world of Mad Max, survival is paramount. With resources scarce and violence rampant, you need every advantage you can get. One such advantage is the car body furnace, a makeshift device that can provide warmth, cook food, and even repair your car.
Materials Required
To build a car body furnace, you will need the following materials:
* Car body: The body of an old, wrecked car will provide the framework for your furnace.
* Metal sheets: You will need several sheets of metal to cover the car body and create the combustion chamber.
* Insulation: Insulation will help to retain heat and prevent the furnace from overheating.
* Firebricks: Firebricks are essential for lining the combustion chamber and protecting the metal sheets from the intense heat.
* Chimney: A chimney is necessary to vent the exhaust gases from the furnace.
Step-by-Step Instructions
1. Prepare the Car Body
* Remove any seats, upholstery, or other debris from the car body.
* Cut off the top of the car body, leaving a frame that is about waist-high.
* Use a grinder or angle grinder to remove any sharp edges or protruding metal.
2. Create the Combustion Chamber
* Cut a rectangular hole in the center of the car body, about 2 feet wide and 3 feet high.
* Line the combustion chamber with firebricks, leaving a small opening at the bottom for airflow.
3. Install the Metal Sheets
* Cut several pieces of metal sheet to fit over the car body and combustion chamber.
* Bolt or weld the metal sheets in place, leaving a small gap for the chimney.
4. Add Insulation
* Cover the metal sheets with a layer of insulation.
* Use a material such as fiberglass or rock wool, and be sure to pack it tightly.
5. Install the Chimney
* Cut a hole in the top of the furnace for the chimney.
* Insert a length of metal pipe or stovepipe into the hole and secure it with a clamp.
6. Test the Furnace
* Fill the combustion chamber with fuel, such as wood, charcoal, or kerosene.
* Light the fuel and allow the furnace to heat up.
* Check for any leaks or gaps in the insulation.
Tips for Use
* To regulate the temperature of the furnace, adjust the airflow by opening or closing the small opening at the bottom of the combustion chamber.
* Use a metal rod or poker to stir the fuel and keep the fire burning evenly.
* Keep the furnace clean by removing ashes and debris regularly.
* Be cautious when handling hot items near the furnace.
* Never leave the furnace unattended.
Conclusion
A car body furnace is a valuable tool in the harsh world of Mad Max. With a little effort and ingenuity, you can build your own furnace and enjoy the benefits of warmth, cooked food, and repaired vehicles.
