How to Hydro Dip RC Car Body

Hydro dipping is a process of applying a printed pattern to a three-dimensional object. It is often used to decorate RC car bodies, as it allows for a wide range of custom designs.

To hydro dip an RC car body, you will need the following materials:

• RC car body
• Hydro dipping film
• Activator
• Water tank
• Heat gun
• Gloves
• Mask

Once you have gathered your materials, you can begin the hydro dipping process.

Step 1: Prepare the RC Car Body

The first step is to prepare the RC car body for hydro dipping. This involves cleaning the body with soap and water to remove any dirt or debris. Once the body is clean, you need to apply a base coat of paint. The base coat will help the hydro dipping film to adhere to the body.

Step 2: Cut the Hydro Dipping Film

Once the base coat is dry, you can cut the hydro dipping film to the desired size. The film should be large enough to cover the entire RC car body.

Step 3: Activate the Hydro Dipping Film

The next step is to activate the hydro dipping film. This is done by spraying the film with activator. The activator will help the film to adhere to the water.

Step 4: Dip the RC Car Body

Once the film is activated, you can dip the RC car body into the water tank. The body should be submerged completely. Hold the body in the water for 30 seconds to 1 minute, or until the film has completely adhered to the body.

Step 5: Remove the RC Car Body

Once the film has adhered to the body, you can remove the body from the water tank. Allow the body to dry for 30 minutes to 1 hour.

Step 6: Heat the Hydro Dipping Film

Once the body is dry, you can heat the hydro dipping film with a heat gun. This will help to set the film and make it more durable.

Step 7: Clear Coat the RC Car Body

The final step is to clear coat the RC car body. This will help to protect the film from scratching and fading.

Tips

• Use a large water tank to ensure that the RC car body is completely submerged.
• Hold the RC car body in the water for 30 seconds to 1 minute, or until the film has completely adhered to the body.
• Heat the hydro dipping film with a heat gun for 1-2 minutes, or until the film is set.
• Clear coat the RC car body with 2-3 coats of clear coat. This will help to protect the film from scratching and fading.

Conclusion

Hydro dipping is a relatively simple process that can be used to create custom RC car bodies with a wide range of designs. By following the steps outlined in this guide, you can create a unique and stylish RC car body that will stand out from the crowd.