How to Put Body Sticker on Car
Materials You’ll Need:
- Body sticker
- Squeegee or credit card
- Rubbing alcohol
- Clean cloths
Step-by-Step Instructions:
1. Clean the Surface
Thoroughly clean the surface of your car where you want to apply the sticker. Use rubbing alcohol and a clean cloth to remove any dirt, grease, or wax. Let the surface dry completely.
2. Peel the Backing Paper
Carefully peel the backing paper off the sticker, leaving the adhesive side exposed.
3. Position the Sticker
Align the sticker with the desired spot on your car. Once you’re happy with the placement, use your squeegee or credit card to gently press the sticker onto the surface.
4. Squeegee the Sticker
Use the squeegee or credit card to apply even pressure to the sticker, starting from the center and working your way outward. This will help to remove any air bubbles or creases.
5. Remove the Transfer Tape
If your sticker has transfer tape, carefully peel it off once you’ve applied the sticker to your car. The transfer tape is a thin, clear film that helps to support the sticker during application.
6. Final Touches
Use a clean cloth to wipe down the sticker and remove any remaining adhesive residue. Allow the sticker to cure for 24 hours before washing your car.
Tips:
- Apply the sticker in a warm, dry environment. This will help the adhesive to bond properly.
- Use a hair dryer to warm up the sticker and make it more pliable, especially if it’s a large or complex design.
- If you get any air bubbles, use a pin to poke a small hole in the bubble and then use the squeegee to press the air out.
- Don’t apply the sticker to a surface that is wet, dirty, or uneven.
- If you need to remove the sticker later, use a heat gun to soften the adhesive and then peel it off gently.
Conclusion
Applying a body sticker to your car is a relatively simple process that can add a personal touch to your vehicle. By following these step-by-step instructions and tips, you can ensure a successful application that will last for years to come.
