How to Remove Badges from Car Body
Badges are a common way to personalize your car, but they can also be a pain to remove. If you’re looking to remove a badge from your car, there are a few different methods you can use.
Using a Heat Gun
One of the most effective ways to remove a badge is to use a heat gun. Heat guns are available at most hardware stores and they’re relatively inexpensive. To use a heat gun to remove a badge, follow these steps:
- Apply heat to the badge for 30-60 seconds. This will loosen the adhesive that’s holding the badge in place.
- Once the adhesive is loose, use a plastic pry tool or a putty knife to gently remove the badge.
- Be careful not to damage the paint on your car when you’re removing the badge.
Using a Hair Dryer
If you don’t have a heat gun, you can also use a hair dryer to remove a badge. Hair dryers don’t get as hot as heat guns, so you’ll need to apply heat for a longer period of time. To use a hair dryer to remove a badge, follow these steps:
- Apply heat to the badge for 1-2 minutes. This will loosen the adhesive that’s holding the badge in place.
- Once the adhesive is loose, use a plastic pry tool or a putty knife to gently remove the badge.
- Be careful not to damage the paint on your car when you’re removing the badge.
Using Adhesive Remover
Adhesive remover can also be used to remove badges from cars. Adhesive remover is a chemical that dissolves the adhesive that’s holding the badge in place. To use adhesive remover to remove a badge, follow these steps:
- Apply a small amount of adhesive remover to a cloth.
- Gently rub the cloth over the badge until the adhesive is dissolved.
- Once the adhesive is dissolved, gently remove the badge.
- Be careful not to damage the paint on your car when you’re removing the badge.
Tips for Removing Badges from Car Body
Here are a few tips for removing badges from car body:
- Always test the method you’re using in an inconspicuous area first to make sure it doesn’t damage the paint on your car.
- Be patient and don’t try to remove the badge too quickly. If you try to remove the badge too quickly, you could damage the paint on your car.
- If you’re having trouble removing the badge, you can try using a combination of methods. For example, you could use a heat gun to loosen the adhesive and then use a plastic pry tool or a putty knife to remove the badge.
Conclusion
Removing badges from car body can be a pain, but it’s not impossible. By following the tips in this article, you can remove badges from your car safely and easily.