How to Remove Scratches from Your Car Body
Scratches on your car’s body are a pain, but they don’t have to be permanent. With a little bit of effort, you can remove scratches from your car body and restore its original shine.
Materials You’ll Need
- Car wash soap
- Water
- Bucket
- Sponge
- Rubbing compound
- Polishing compound
- Wax
- Microfiber cloths
Step-by-Step Instructions
1. Wash the car
The first step is to wash the car to remove any dirt or debris that could interfere with the scratch removal process. Use a car wash soap and water, and wash the car thoroughly, making sure to get into all the nooks and crannies.
2. Dry the car
Once the car is washed, dry it thoroughly using a microfiber cloth. Make sure to get all the water off the car, as any remaining water droplets could cause the rubbing compound to streak.
3. Apply the rubbing compound
The next step is to apply the rubbing compound. Rubbing compound is a mild abrasive that will help to remove the scratches from the car’s body. Apply the rubbing compound to a microfiber cloth, and then rub the cloth over the scratches in a circular motion. Apply medium pressure, and continue rubbing until the scratches are gone.
4. Remove the rubbing compound
Once the scratches are gone, remove the rubbing compound using a clean microfiber cloth. Wipe the cloth over the area where you applied the rubbing compound, and continue wiping until all the rubbing compound is removed.
5. Apply the polishing compound
Once the rubbing compound is removed, apply the polishing compound. Polishing compound is a finer abrasive that will help to restore the shine to the car’s body. Apply the polishing compound to a microfiber cloth, and then rub the cloth over the area where you applied the rubbing compound in a circular motion. Apply light pressure, and continue rubbing until the area is shiny.
6. Remove the polishing compound
Once the polishing compound is applied, remove it using a clean microfiber cloth. Wipe the cloth over the area where you applied the polishing compound, and continue wiping until all the polishing compound is removed.
7. Apply the wax
The final step is to apply the wax. Wax will help to protect the car’s body from future scratches and will also help to restore the shine. Apply the wax to a microfiber cloth, and then rub the cloth over the car’s body in a circular motion. Apply light pressure, and continue rubbing until the wax is evenly distributed. Allow the wax to dry for several minutes, and then buff it off using a clean microfiber cloth.
Tips
- If the scratches are deep, you may need to use a more aggressive rubbing compound.
- Be careful not to apply too much pressure when rubbing the rubbing compound or polishing compound, as this could damage the car’s body.
- Always test the rubbing compound or polishing compound on an inconspicuous area of the car before applying it to the entire car.
- Wax your car regularly to help protect it from future scratches.
Conclusion
Removing scratches from your car body is a relatively simple process that can be done with a few simple materials. By following the steps outlined in this article, you can restore your car’s body to its original shine.
