How to Reproduce RC Car Body

Introduction

RC car bodies are often made of thin, flexible plastic that can be easily damaged. If your RC car body is damaged, you can replace it with a new one, or you can try to repair it yourself. Repairing an RC car body is a relatively simple process that can be completed in a few hours.

Materials

To repair an RC car body, you will need the following materials:

* RC car body
* Sandpaper
* Epoxy glue
* Fiberglass cloth
* Resin
* Brush
* Scissors
* Clamps

Instructions

1. Clean the RC car body. Remove any dirt or debris from the RC car body using a damp cloth.
2. Sand the damaged area. Use sandpaper to roughen up the damaged area. This will help the epoxy glue to adhere better.
3. Apply epoxy glue to the damaged area. Apply a thin layer of epoxy glue to the damaged area. Be sure to work the glue into the cracks and crevices.
4. Place fiberglass cloth over the damaged area. Cut a piece of fiberglass cloth to fit over the damaged area. Place the fiberglass cloth over the damaged area and smooth it out.
5. Apply resin to the fiberglass cloth. Apply a thin layer of resin to the fiberglass cloth. Be sure to work the resin into the fiberglass cloth.
6. Clamp the fiberglass cloth in place. Use clamps to hold the fiberglass cloth in place until the resin has cured.
7. Allow the resin to cure. Allow the resin to cure for at least 24 hours.
8. Sand the repaired area. Once the resin has cured, sand the repaired area smooth.
9. Paint the RC car body. If desired, you can paint the RC car body to match the rest of the car.

Tips

* If the damaged area is large, you may need to use multiple layers of fiberglass cloth.
* Be sure to allow the resin to cure completely before sanding or painting the RC car body.
* If you are not comfortable repairing the RC car body yourself, you can take it to a hobby shop and have them repair it for you.

Conclusion

Repairing an RC car body is a relatively simple process that can be completed in a few hours. By following the instructions in this article, you can repair your RC car body and get it back on the track in no time.