Painting Windows on RC Car Bodies

Painting windows on RC car bodies can be a tricky task, but it’s definitely worth it if you want to give your car a more realistic look. In this guide, we’ll walk you through the entire process, from prepping your car body to applying the final touches.

Step 1: Prep Your Car Body

Before you start painting, it’s important to prep your car body properly. This will help the paint adhere better and give you a more professional-looking finish.

• Clean the car body. Use a mild soap and water solution to clean the car body and remove any dirt or grease.
• Sand the car body. Use a fine-grit sandpaper to sand the car body lightly. This will help the paint adhere better.
• Mask off the areas you don’t want to paint. Use masking tape to cover up the areas of the car body that you don’t want to paint, such as the headlights, taillights, and grille.

Step 2: Choose Your Paint

There are a few different types of paint that you can use to paint windows on RC car bodies. The most popular types are:

• Tamiya PS paints. These paints are specifically designed for RC car bodies and are very durable.
• Acrylic paints. These paints are also very durable, but they can be more difficult to apply.
• Enamel paints. These paints are not as durable as Tamiya PS paints or acrylic paints, but they are very easy to apply.

Step 3: Apply the Paint

Once you’ve chosen your paint, it’s time to apply it to the car body.

• Use a light, even coat. Don’t apply too much paint at once, or it will run and create streaks.
• Allow each coat to dry completely. Before applying another coat, allow the previous coat to dry completely. This will help prevent the paint from peeling or chipping.
• Apply several coats of paint. It’s best to apply several thin coats of paint, rather than one thick coat.

Step 4: Remove the Masking Tape

Once the paint has dried completely, it’s time to remove the masking tape. Do this carefully to avoid peeling or chipping the paint.

Step 5: Apply a Clear Coat

To protect the paint and give it a glossy finish, apply a clear coat to the car body. You can use a spray-on clear coat or a brush-on clear coat.

Step 6: Allow the Clear Coat to Dry

Allow the clear coat to dry completely before handling the car body.

Step 7: Enjoy Your New Windows!

Once the clear coat has dried, your new windows are complete! Now you can enjoy the more realistic look of your RC car body.

Tips for Painting Windows on RC Car Bodies

• Use a steady hand. When painting windows, it’s important to use a steady hand to avoid creating streaks or smudges.
• Take your time. Don’t rush the painting process. Allow each coat of paint to dry completely before applying the next coat.
• Use a bright light. When painting, it’s important to use a bright light so that you can see what you’re doing.
• Practice on a scrap piece of plastic. Before painting the actual car body, practice on a scrap piece of plastic to get the hang of it.

Conclusion

Painting windows on RC car bodies can be a bit challenging, but it’s definitely worth it if you want to give your car a more realistic look. By following the steps in this guide, you can achieve professional-looking results.