RC Car Body Shell Repair

Introduction

RC car body shells are made of a variety of materials, including polycarbonate, lexan, and ABS plastic. These materials are all durable, but they can be damaged in a crash. If your RC car body shell is damaged, don’t worry! It can be repaired. In this article, we will show you how to repair a damaged RC car body shell.

Materials you will need

Sandpaper
Epoxy
Fiberglass cloth
Scissors
Paint
Clear coat

Instructions

Clean the damaged area. Use sandpaper to clean the damaged area and remove any dirt or debris. Make sure the area is clean and dry.
Epoxy the damaged area. Apply a thin layer of epoxy to the damaged area. Use a brush or a toothpick to apply the epoxy. Allow the epoxy to dry for at least 24 hours.
Fiberglass the damaged area. Cut a piece of fiberglass cloth to the size of the damaged area. Apply the fiberglass cloth to the damaged area and smooth it out. Use epoxy to adhere the fiberglass cloth to the body shell. Allow the epoxy to dry for at least 24 hours.
Sand the repaired area. Once the epoxy has dried, sand the repaired area smooth. Use fine-grit sandpaper and be careful not to sand through the body shell.
Paint the repaired area. Apply a thin layer of paint to the repaired area. Use a brush or a spray gun to apply the paint. Allow the paint to dry for at least 24 hours.
Clear coat the repaired area. Apply a thin layer of clear coat to the repaired area. Use a brush or a spray gun to apply the clear coat. Allow the clear coat to dry for at least 24 hours.

Tips

Use a two-part epoxy for the best results.
Apply the fiberglass cloth in multiple layers for added strength.
Sand the repaired area carefully to avoid damaging the body shell.
Allow the paint and clear coat to dry completely before using the RC car.

Conclusion

Repairing a damaged RC car body shell is a simple process that can be completed in a few hours. By following the instructions in this article, you can repair your RC car body shell and get it back on the track in no time.