How to Strip Paint Off RC Car Body
Materials You’ll Need
- Nitrile gloves
- Safety glasses
- Paint stripper
- Plastic scraper
- Toothbrush
- Water
- Paper towels
Safety Precautions
Before you begin, it’s important to take some safety precautions. Nitrile gloves and safety glasses will protect your skin and eyes from the paint stripper. Be sure to work in a well-ventilated area, as paint stripper fumes can be harmful if inhaled.
Step-by-Step Instructions
1. Apply Paint Stripper
Apply a generous amount of paint stripper to the surface of the RC car body. Use a brush or sponge to spread the stripper evenly. Allow the stripper to sit for the amount of time specified on the product label. This will allow the stripper to penetrate the paint and break it down.
2. Scrape Off Paint
Once the paint has softened, use a plastic scraper to gently scrape it off the RC car body. Be careful not to scratch the plastic. If the paint is particularly thick, you may need to apply more paint stripper and let it sit for longer. Repeat this process until all of the paint has been removed.
3. Clean the Body
Once all of the paint has been removed, use a toothbrush to scrub the RC car body with water. This will remove any remaining paint stripper or residue. Rinse the body thoroughly with water and dry it with paper towels.
Tips
- Test the paint stripper on an inconspicuous area of the RC car body before applying it to the entire surface. This will ensure that the stripper does not damage the plastic.
- If the paint is particularly thick, you may need to apply multiple coats of paint stripper. Allow each coat to sit for the amount of time specified on the product label before scraping it off.
- Be patient and take your time. Stripping paint off RC car body can be a time-consuming process.
Conclusion
Stripping paint off RC car body is a relatively simple process, but it’s important to take some safety precautions and follow the instructions carefully. With a little patience and effort, you can get your RC car body looking like new.
