1989 Lincoln Town Car Transmission Fluid Amount

Transmission Fluid Type

The 1989 Lincoln Town Car uses Mercon ATF fluid.

Transmission Fluid Capacity

The 1989 Lincoln Town Car has a transmission fluid capacity of 10 quarts.

How to Check Transmission Fluid Level

To check the transmission fluid level, follow these steps:

1. Park the car on a level surface.
2. Shift the transmission into park.
3. Open the hood and locate the transmission dipstick.
4. Pull out the dipstick and wipe it clean.
5. Reinsert the dipstick into the transmission and pull it out again.
6. Check the fluid level on the dipstick. The fluid level should be between the “Full” and “Add” marks on the dipstick.

How to Add Transmission Fluid

To add transmission fluid, follow these steps:

1. Locate the transmission fluid filler tube.
2. Insert a funnel into the filler tube.
3. Add transmission fluid to the funnel until the fluid level on the dipstick reaches the “Full” mark.
4. Replace the dipstick.

Transmission Fluid Change Interval

The transmission fluid in a 1989 Lincoln Town Car should be changed every 30,000 miles.

Transmission Fluid Filter

The transmission fluid filter in a 1989 Lincoln Town Car should be changed at the same time as the transmission fluid.

Transmission Fluid Cooler

The 1989 Lincoln Town Car has a transmission fluid cooler that helps to keep the transmission fluid cool.

Transmission Fluid Pump

The transmission fluid pump in a 1989 Lincoln Town Car helps to circulate the transmission fluid through the transmission.

Transmission Fluid Pressure

The transmission fluid pressure in a 1989 Lincoln Town Car should be between 70 and 100 psi.

Transmission Fluid Temperature

The transmission fluid temperature in a 1989 Lincoln Town Car should be between 160 and 180 degrees Fahrenheit.

Transmission Fluid Condition

The transmission fluid in a 1989 Lincoln Town Car should be clean and free of debris.