1996 Lincoln Town Car Transmission Fluid Type
Introduction
The 1996 Lincoln Town Car is a full-size luxury sedan that was produced by Ford Motor Company. It was the eighth generation of the Town Car, and it was available in both rear-wheel drive and all-wheel drive configurations. The Town Car was powered by a variety of engines, including a 4.6-liter V8 and a 4.6-liter V8 with supercharger.
The transmission in the 1996 Lincoln Town Car is a four-speed automatic transmission. It is electronically controlled and features a lock-up torque converter. The transmission fluid is essential for the proper operation of the transmission. It helps to lubricate the moving parts, cool the transmission, and prevent wear and tear.
What Type of Transmission Fluid Does the 1996 Lincoln Town Car Use?
The 1996 Lincoln Town Car uses MERCON V transmission fluid. MERCON V is a synthetic transmission fluid that is designed for use in Ford vehicles. It is backward compatible with previous MERCON fluids, so it can be used in older Ford vehicles as well.
How to Check the Transmission Fluid Level
The transmission fluid level should be checked regularly to ensure that the transmission is operating properly. To check the transmission fluid level, follow these steps:
1. Park the vehicle on a level surface.
2. Shift the transmission into park.
3. Open the hood and locate the transmission fluid dipstick. The dipstick is usually located near the back of the engine.
4. Pull out the dipstick and wipe it clean with a rag.
5. Reinsert the dipstick into the transmission fluid pan.
6. Pull out the dipstick again and check the fluid level. The fluid level should be between the “full” and “add” marks on the dipstick.
How to Change the Transmission Fluid
The transmission fluid should be changed every 30,000 miles or so. To change the transmission fluid, follow these steps:
1. Gather the following materials:
* New transmission fluid (MERCON V)
* Transmission filter
* Transmission pan gasket
* Drain pan
* Funnel
* Rags
2. Park the vehicle on a level surface.
3. Shift the transmission into park.
4. Open the hood and locate the transmission fluid pan. The transmission fluid pan is usually located at the bottom of the transmission.
5. Place the drain pan under the transmission fluid pan.
6. Remove the transmission fluid pan bolts.
7. Allow the transmission fluid to drain into the drain pan.
8. Once the transmission fluid has drained, remove the transmission filter.
9. Clean the transmission pan and the mating surface on the transmission.
10. Install a new transmission filter and transmission pan gasket.
11. Reinstall the transmission fluid pan and tighten the bolts.
12. Add new transmission fluid to the transmission through the funnel.
13. Check the transmission fluid level and add more fluid if necessary.
14. Start the engine and shift through all of the gears.
15. Check the transmission fluid level again and add more fluid if necessary.
Conclusion
The transmission fluid in the 1996 Lincoln Town Car is essential for the proper operation of the transmission. It is important to check the transmission fluid level regularly and to change the transmission fluid every 30,000 miles or so. By following the steps outlined in this article, you can ensure that the transmission in your Town Car will last for many years to come.
