1997 Lincoln Town Car Transmission Fluid Change

Tools and Materials

• New transmission fluid (Mercon V)
• Drain pan
• Funnel
• 17mm socket wrench
• 8mm hex key

Safety Precautions

• Wear gloves and safety glasses.
• Work in a well-ventilated area.
• Allow the engine to cool down before starting work.

Procedure

1. Drain the old fluid

1. Place the drain pan under the transmission pan.
2. Use the 17mm socket wrench to remove the drain plug.
3. Allow the old fluid to drain completely.
4. Replace the drain plug.

2. Remove the transmission pan

1. Use the 8mm hex key to remove the bolts that hold the transmission pan in place.
2. Gently pry the transmission pan loose from the transmission.
3. Be careful not to spill any residual fluid.

3. Clean the transmission pan and filter

1. Use a clean rag to wipe down the transmission pan and filter.
2. Inspect the filter for any damage or wear.
3. If the filter is damaged or worn, replace it with a new one.

4. Reinstall the transmission pan

1. Place a new gasket on the transmission pan.
2. Position the transmission pan on the transmission and tighten the bolts.
3. Do not overtighten the bolts.

5. Add new fluid

1. Use a funnel to add new transmission fluid to the transmission.
2. Add fluid until the level reaches the “Full” mark on the dipstick.
3. Do not overfill the transmission.

6. Check the fluid level

1. Start the engine and allow it to idle for a few minutes.
2. Shift the transmission through all of the gears.
3. Check the fluid level on the dipstick.
4. Add more fluid if necessary.

Conclusion

Changing the transmission fluid in a 1997 Lincoln Town Car is a relatively simple procedure that can be completed in about an hour. By following these steps, you can help to extend the life of your transmission and keep your car running smoothly.