89 Town Car Transmission Filter Change

Introduction

The transmission filter is a crucial component of your 89 Town Car’s transmission system. It helps to remove contaminants from the transmission fluid, which can help to extend the life of the transmission. Changing the transmission filter is a relatively simple process that can be completed in about an hour.

Tools and Materials

You will need the following tools and materials to change the transmission filter in your 89 Town Car:

* New transmission filter
* Transmission fluid
* Funnel
* 15mm socket wrench
* 10mm socket wrench
* Drain pan
* Rags

Safety Precautions

Before you begin working on your 89 Town Car, be sure to take the following safety precautions:

* Park the car on a level surface and engage the parking brake.
* Allow the engine to cool down completely.
* Wear safety glasses and gloves.

Step-by-Step Instructions

1. Locate the transmission pan. The transmission pan is located at the bottom of the transmission. It is held in place by bolts.
2. Place the drain pan under the transmission pan.
3. Remove the bolts that hold the transmission pan in place.
4. Carefully remove the transmission pan. Be careful not to spill any transmission fluid.
5. Replace the old transmission filter with the new transmission filter.
6. Clean the transmission pan and reinstall it.
7. Tighten the bolts that hold the transmission pan in place.
8. Add transmission fluid to the transmission.
9. Start the engine and check for leaks.

Tips

* Use a new transmission filter every time you change the transmission fluid.
* Always check the transmission fluid level after changing the transmission filter.
* If you are not comfortable changing the transmission filter yourself, you can have it done by a mechanic.

Conclusion

Changing the transmission filter in your 89 Town Car is a simple process that can help to extend the life of the transmission. By following the steps outlined in this article, you can easily change the transmission filter yourself.