Automatic Transmission Car Won’t Go Into Reverse
If your automatic transmission car won’t go into reverse, there are a few things you can check. First, make sure that the car is in park. If it is, try shifting the gear selector to reverse and then back to park. If this doesn’t work, there could be a problem with the transmission. Here are some of the most common causes of an automatic transmission car not going into reverse:
Low transmission fluid
One of the most common causes of an automatic transmission car not going into reverse is low transmission fluid. The transmission fluid helps to lubricate the gears and other moving parts in the transmission. If the fluid is low, it can cause the gears to slip and make it difficult to shift into reverse.
To check the transmission fluid, you will need to locate the dipstick. The dipstick is usually located near the back of the engine. Once you have located the dipstick, pull it out and wipe it clean. Then, reinsert the dipstick into the transmission and pull it out again. The fluid level should be between the two marks on the dipstick. If the fluid level is low, you will need to add more fluid.
Dirty transmission fluid
Another common cause of an automatic transmission car not going into reverse is dirty transmission fluid. The transmission fluid can become dirty over time due to normal wear and tear. When the fluid is dirty, it can cause the gears to slip and make it difficult to shift into reverse.
To clean the transmission fluid, you will need to have it flushed. A transmission flush is a process that removes the old fluid and replaces it with new fluid. You can have a transmission flush done at a transmission shop or at a dealership.
Faulty shift cable
The shift cable is a cable that connects the gear selector to the transmission. If the shift cable is faulty, it can make it difficult to shift the car into reverse. The shift cable can become faulty due to normal wear and tear or due to damage. If the shift cable is damaged, it will need to be replaced.
Faulty transmission solenoid
The transmission solenoid is a solenoid that controls the flow of transmission fluid. If the transmission solenoid is faulty, it can cause the transmission to not shift into reverse. The transmission solenoid can become faulty due to normal wear and tear or due to damage. If the transmission solenoid is damaged, it will need to be replaced.
Faulty transmission
If all of the other possible causes have been ruled out, then the problem may be with the transmission itself. The transmission may be damaged or worn out. If the transmission is damaged or worn out, it will need to be rebuilt or replaced.
How to fix an automatic transmission car that won’t go into reverse
If your automatic transmission car won’t go into reverse, you can try the following steps:
- Check the transmission fluid level and add more fluid if necessary.
- Have the transmission fluid flushed.
- Inspect the shift cable for damage and replace it if necessary.
- Inspect the transmission solenoid for damage and replace it if necessary.
- If all of the other possible causes have been ruled out, then the problem may be with the transmission itself. The transmission may need to be rebuilt or replaced.
If you are not comfortable performing any of these repairs yourself, you should take your car to a transmission shop or dealership.
