- Enterprise Rent-A-Car Manual Transmission Guide
- Introduction
- Getting Started
- 1. Find the clutch pedal.
- 2. Depress the clutch pedal fully.
- 3. Turn the ignition key to the “on” position.
- 4. Shift into first gear.
- 5. Slowly release the clutch pedal while simultaneously applying pressure to the gas pedal.
- Shifting Gears
- 1. Depress the clutch pedal fully.
- 2. Move the gear lever to the desired gear.
- 3. Slowly release the clutch pedal while simultaneously applying pressure to the gas pedal.
- Coming to a Stop
- 1. Depress the clutch pedal fully.
- 2. Apply the brakes to slow the car down.
- 3. Shift into neutral gear.
- 4. Release the clutch pedal.
- Tips for Driving a Manual Transmission Car
- Conclusion
Enterprise Rent-A-Car Manual Transmission Guide
Introduction
If you’re planning on renting a manual transmission car from Enterprise, it’s important to be familiar with the basics of driving a manual. This guide will provide you with everything you need to know, from how to start the car to how to shift gears.
Getting Started
1. Find the clutch pedal.
The clutch pedal is located on the far left of the footwell. It’s the pedal that you use to disengage the transmission from the engine.
2. Depress the clutch pedal fully.
This will disengage the transmission from the engine, allowing you to shift gears.
3. Turn the ignition key to the “on” position.
This will power up the car’s electrical system, but will not start the engine.
4. Shift into first gear.
To shift into first gear, move the gear lever all the way to the left and then up. You should feel a slight resistance as the gear lever enters first gear.
5. Slowly release the clutch pedal while simultaneously applying pressure to the gas pedal.
As you release the clutch pedal, the car will begin to move forward. Be sure to coordinate the release of the clutch pedal with the application of the gas pedal to avoid stalling the engine.
Shifting Gears
Once you are moving, you will need to shift gears to maintain a consistent speed and to accelerate or decelerate. To shift gears, follow these steps:
1. Depress the clutch pedal fully.
This will disengage the transmission from the engine.
2. Move the gear lever to the desired gear.
To shift into a higher gear, move the gear lever to the left and then up. To shift into a lower gear, move the gear lever to the right and then down.
3. Slowly release the clutch pedal while simultaneously applying pressure to the gas pedal.
As you release the clutch pedal, the car will shift into the new gear. Be sure to coordinate the release of the clutch pedal with the application of the gas pedal to avoid stalling the engine.
Coming to a Stop
To come to a stop in a manual transmission car, follow these steps:
1. Depress the clutch pedal fully.
This will disengage the transmission from the engine.
2. Apply the brakes to slow the car down.
Be sure to apply the brakes smoothly to avoid skidding.
3. Shift into neutral gear.
To shift into neutral gear, move the gear lever to the center position.
4. Release the clutch pedal.
This will fully disengage the transmission from the engine.
Tips for Driving a Manual Transmission Car
Here are a few tips to help you drive a manual transmission car confidently:
- Practice in a safe, open area before driving in traffic.
- Be patient and don’t get discouraged if you stall the engine a few times.
- Listen to the sound of the engine to determine when to shift gears.
- Don’t be afraid to ask for help from a friend or family member if you’re having trouble.
Conclusion
Driving a manual transmission car can be a rewarding experience. With a little practice, you’ll be shifting gears like a pro in no time.