Evo 9 RC Car Body Painted

Introduction

The Mitsubishi Lancer Evolution 9 is a popular choice for RC car enthusiasts due to its aggressive styling and impressive performance. If you’re looking to give your Evo 9 RC car a unique look, painting the body is a great way to do it. In this guide, we’ll walk you through the steps on how to paint an Evo 9 RC car body.

Materials

• Evo 9 RC car body
• Automotive primer
• Automotive paint
• Clear coat
• Masking tape
• Sandpaper
• Paintbrush or airbrush

Instructions

1. Prepare the body

Before you can start painting, you need to prepare the body by sanding it down to remove any imperfections. Start with a coarse sandpaper and gradually work your way down to a finer grit. Once the body is smooth, clean it with rubbing alcohol to remove any dust or debris.

2. Apply primer

Primer helps to create a smooth surface for the paint to adhere to. Apply a thin coat of primer to the entire body and let it dry completely. Once the primer is dry, sand it lightly with a fine-grit sandpaper.

3. Paint the body

Now it’s time to apply the paint. You can use a paintbrush or an airbrush to apply the paint. If you’re using a paintbrush, use thin, even strokes. If you’re using an airbrush, hold the airbrush about 6 inches from the body and spray in a smooth, even motion.

Allow the paint to dry completely before applying a second coat. You may need to apply multiple coats of paint to achieve the desired color and opacity.

4. Apply clear coat

Clear coat helps to protect the paint from scratches and fading. Apply a thin coat of clear coat to the entire body and let it dry completely. Once the clear coat is dry, you can polish it to a high shine.

5. Remove the masking tape

Once the clear coat is completely dry, you can remove the masking tape. Carefully peel the tape away from the body, being careful not to damage the paint.

6. Enjoy your painted Evo 9 RC car body!

Your Evo 9 RC car body is now painted and ready to race! Enjoy the satisfaction of driving your own custom-painted RC car.

Tips

• Use high-quality automotive primer and paint for best results.
• Allow each coat of paint to dry completely before applying the next coat.
• Use masking tape to protect areas of the body that you don’t want to paint.
• Be patient and take your time when painting your Evo 9 RC car body. The results will be worth it!

Conclusion

Painting an Evo 9 RC car body is a fun and rewarding project that can give your car a unique look. By following the steps in this guide, you can achieve a professional-looking finish that will make your car stand out from the crowd.