How to Change Car Transmission from Manual to Automatic
Introduction
The transmission is one of the most important parts of a car. It is responsible for transferring power from the engine to the wheels. There are two main types of transmissions: manual and automatic. Manual transmissions require the driver to shift gears manually, while automatic transmissions do this automatically.
In some cases, it may be necessary to change the transmission from manual to automatic. This could be due to a number of reasons, such as a disability or a preference for automatic transmissions.
Step 1: Gather the necessary tools and materials.
You will need the following tools and materials to change the transmission from manual to automatic:
* A new automatic transmission
* A new torque converter
* A new transmission mount
* A new driveshaft
* A new shifter
* A new wiring harness
* A new computer
* A new set of keys
* A set of wrenches
* A set of sockets
* A screwdriver
* A hammer
* A pry bar
* A jack
* A jack stand
Step 2: Remove the old transmission.
1. Park the car on a level surface and engage the parking brake.
2. Disconnect the negative battery terminal.
3. Remove the air cleaner.
4. Remove the starter.
5. Disconnect the shift linkage.
6. Remove the driveshaft.
7. Unbolt the transmission mount.
8. Lower the transmission using a jack.
Step 3: Install the new automatic transmission.
1. Lift the new transmission into place using a jack.
2. Bolt the transmission mount to the transmission.
3. Connect the driveshaft to the transmission.
4. Connect the shift linkage to the transmission.
5. Install the starter.
6. Install the air cleaner.
7. Connect the negative battery terminal.
Step 4: Program the new computer.
The new computer will need to be programmed to work with the new transmission. This can be done by a qualified mechanic.
Step 5: Test the new transmission.
Once the new transmission is installed, it is important to test it to make sure it is working properly. Drive the car around for a few miles and check for any problems.
Conclusion
Changing the transmission from manual to automatic is a complex process, but it can be done with the right tools and materials. If you are not comfortable performing this task yourself, it is best to have it done by a qualified mechanic.
