How to Change Manual Transmission Project Cars 2

Introduction

Project Cars 2 is a realistic racing simulator that allows you to experience the thrill of driving some of the world’s most iconic cars on some of the most challenging tracks. If you’re new to Project Cars 2, or if you’re just looking for a refresher, this guide will show you how to change manual transmission.

Prerequisites

Before you can change manual transmission in Project Cars 2, you’ll need to make sure that you have the following:

*

• A steering wheel with paddle shifters or a gear stick.
• The Project Cars 2 game installed on your computer.
• A basic understanding of how to drive a car with a manual transmission.

Changing Manual Transmission

To change manual transmission in Project Cars 2, follow these steps:

1.

1. Start the Project Cars 2 game.
2. Go to the “Options” menu.
3. Select the “Controls” tab.
4. Scroll down to the “Transmission” section.
5. Select the “Manual” option.
6. Click the “Apply” button.

2.

Once you’ve changed the transmission to manual, you’ll need to assign the gear shift controls to your steering wheel or gear stick. To do this, follow these steps:

1. Go to the “Controls” tab in the “Options” menu.
2. Scroll down to the “Gear Shift” section.
3. Assign the gear shift controls to the appropriate buttons or paddles on your steering wheel or gear stick.
4. Click the “Apply” button.

3.

Now that you’ve changed the transmission to manual and assigned the gear shift controls, you’re ready to start driving. To drive with a manual transmission, you’ll need to use the gear shift controls to change gears. The following table shows the gear shift pattern for a typical 6-speed manual transmission:

| Gear | Position |
|—|—|
| Neutral | Center |
| Reverse | Pull back |
| 1st gear | Push forward |
| 2nd gear | Push forward twice |
| 3rd gear | Push forward three times |
| 4th gear | Push forward four times |
| 5th gear | Push forward five times |
| 6th gear | Push forward six times |

4.

When you’re driving with a manual transmission, you’ll need to pay attention to the engine’s rev counter. The rev counter will tell you how fast the engine is spinning. You’ll need to shift gears when the engine reaches a certain RPM. The ideal shift point will vary depending on the car you’re driving and the track you’re on.

5.

Once you’ve mastered the basics of driving with a manual transmission, you can start to experiment with different driving techniques. For example, you can try heel-and-toe shifting or downshifting to slow down the car.

Conclusion

Changing manual transmission in Project Cars 2 is a straightforward process. By following the steps in this guide, you’ll be able to get behind the wheel of your favorite car and experience the thrill of driving with a manual transmission.