How to Install a Body Lift Kit on a Car

Introduction

A body lift kit is a great way to increase the ground clearance of your car and make it more off-road capable. Installing a body lift kit is not a difficult task, but it does require some time and effort. In this guide, we will walk you through the steps on how to install a body lift kit on your car.

What You Will Need

Before you begin, you will need to gather the following tools and materials:

* Body lift kit
* Socket wrench set
* Ratchet
* Torque wrench
* Jack stands
* Jack
* Wheel chocks

Step 1: Prepare Your Car

Start by parking your car on a level surface and engaging the parking brake. Place wheel chocks behind the wheels to prevent the car from rolling. Jack up the front of the car and place jack stands under the designated jack points. Repeat this process for the rear of the car.

Step 2: Remove the Bumper and Fender Flares

In most cases, you will need to remove the bumper and fender flares in order to install the body lift kit. This process will vary depending on your specific car, but generally, it involves removing a few bolts and then pulling the bumper or fender flares off.

Step 3: Disconnect the Electrical Connections

Once the bumper and fender flares are removed, you will need to disconnect any electrical connections that are attached to them. This may include the headlights, turn signals, and brake lights.

Step 4: Install the Body Lift Kit

Now it’s time to install the body lift kit. Start by placing the body lift blocks on the frame of the car. Make sure that the blocks are properly aligned and then secure them in place using the provided bolts.

Once the body lift blocks are installed, you will need to install the body lift spacers on top of them. The body lift spacers will help to raise the body of the car up off the frame. Secure the body lift spacers in place using the provided bolts.

Step 5: Reinstall the Bumper and Fender Flares

Once the body lift kit is installed, you can reinstall the bumper and fender flares. This process is simply the reverse of what you did in Step 2.

Step 6: Reconnect the Electrical Connections

Reconnect any electrical connections that were disconnected in Step 3. Make sure that all of the connections are secure.

Step 7: Lower the Car and Remove the Jack Stands

Lower the car down to the ground and remove the jack stands. Double-check all of the bolts to make sure that they are tightened properly.

Conclusion

Installing a body lift kit on a car is not a difficult task, but it does require some time and effort. By following the steps in this guide, you can safely and easily install a body lift kit on your car and increase its ground clearance.