How to Jack Up a Car with a Body Kit
Introduction
Jacking up a car with a body kit can be a tricky task, as the body kit can make it difficult to find a good place to place the jack. However, with a little care and attention, it is possible to jack up a car with a body kit safely and easily.
Materials
- Jack
- Jack stands
- Wheel chocks
- Gloves
Safety Precautions
- Park the car on a level surface.
- Engage the parking brake.
- Place wheel chocks behind the wheels that will not be jacked up.
- Wear gloves to protect your hands.
Step-by-Step Instructions
- Locate the jack points on the car. These are usually located on the frame of the car, near the wheels.
- Place the jack under the jack point and pump the handle until the car is lifted off the ground.
- Place a jack stand under the car, next to the jack. Lower the car onto the jack stand.
- Repeat steps 2 and 3 for the other side of the car.
Tips
- If you are unsure about where to place the jack, consult your car’s owner’s manual.
- Use a jack that is rated for the weight of your car.
- Always use jack stands to support the car when it is jacked up.
- Never get under a car that is supported only by a jack.
Conclusion
Jacking up a car with a body kit is a relatively simple task, as long as you take the proper precautions. By following the steps outlined in this guide, you can safely and easily jack up your car and perform any necessary repairs or maintenance.