How to Jack Up a Car with Cervini Body Kit

Introduction

If you have a car with a Cervini body kit, you may be wondering how to jack it up. The process is slightly different than jacking up a car with a standard body kit, but it’s still relatively easy to do. Here are the steps you need to follow:

Step 1: Gather Your Tools

Before you start, you’ll need to gather a few tools. These include:

• A floor jack
• Two jack stands
• A wheel chock
• A piece of wood

Step 2: Choose a Jacking Point

Once you have your tools, you need to choose a jacking point on your car. The jacking points are located on the frame of your car, and they are usually marked with a small notch or indentation. It is important to use a jacking point that is specifically designed for your car, as using the wrong jacking point could damage your car.

Step 3: Position the Jack

Once you have chosen a jacking point, position the floor jack under the car. Make sure that the jack is centered on the jacking point and that it is stable.

Step 4: Pump the Jack

Once the jack is in place, start pumping the handle to raise the car. Pump the handle slowly and evenly, and stop when the car is at the desired height.

Step 5: Place the Jack Stands

Once the car is at the desired height, place the jack stands under the car. The jack stands should be placed next to the jacking points, and they should be adjusted so that they are supporting the weight of the car.

Step 6: Remove the Jack

Once the jack stands are in place, you can remove the floor jack.

Step 7: Place the Wheel Chock

To prevent the car from rolling, place a wheel chock behind one of the wheels.

Step 8: Perform Your Work

Once the car is safely jacked up, you can perform your work. Be sure to take all necessary safety precautions, and never work under a car that is not properly supported.

Step 9: Lower the Car

When you are finished with your work, lower the car by slowly releasing the pressure on the jack stands. Once the car is on the ground, remove the jack stands and the wheel chock.

Conclusion

Jacking up a car with a Cervini body kit is a relatively easy process, but it is important to follow the steps carefully to avoid damaging your car.