Contents
How to Lock Wheels in a Manual Transmission Car
Introduction
Locking the wheels in a manual transmission car is a dangerous maneuver that can cause serious injury or property damage. However, it is a common stunt performed by some car enthusiasts. It is done by shifting the car into neutral while driving at a high speed and then quickly applying the brakes.
The Dangers of Locking Wheels
There are several dangers associated with locking the wheels in a manual transmission car:
- Loss of control. When the wheels are locked, the car will no longer respond to steering or braking input. This can lead to a loss of control and an accident.
- Tire damage. Locking the wheels can cause the tires to skid and flat-spot. This can make the tires unsafe to drive on and require them to be replaced.
- Driveline damage. Locking the wheels can also damage the car’s driveline, including the transmission, differential, and driveshaft. This can be a costly repair.
How to Lock Wheels
Follow these steps to lock the wheels in a manual transmission car
- Shift into neutral. While driving at a high speed, shift the car into neutral.
- Apply the brakes. Quickly and firmly apply the brakes. The car will begin to skid.
- Hold the brake pedal down. Continue to hold the brake pedal down until the car comes to a stop.
Tips for Locking Wheels
Here are a few tips for locking the wheels in a manual transmission car:
- Only do this on a closed course. Never attempt to lock the wheels on a public road.
- Be prepared for loss of control. When the wheels are locked, the car will no longer respond to steering or braking input. Be prepared for the car to skid or spin.
- Don’t hold the brake pedal down for too long. If you hold the brake pedal down for too long, the tires will overheat and could blow out.
Conclusion
Locking the wheels in a manual transmission car is a dangerous maneuver that should only be performed by experienced drivers on a closed course. If you are not experienced, do not attempt this maneuver.
