How to Make a Car Body Rotisserie
Introduction
A car body rotisserie is a specialized piece of equipment that allows you to rotate a car body 360 degrees for easier access during painting, repairs, or restoration. While commercial rotisseries can be expensive, it is possible to make your own with a little time and effort. This guide will provide you with step-by-step instructions on how to build your own car body rotisserie.
Materials List
- 4 heavy-duty casters (rated for at least 1,000 pounds each)
- 4 steel pipes (2 inches in diameter, 8 feet long)
- 4 steel plates (12 inches by 12 inches, 1/4 inch thick)
- 4 bolts (1/2 inch diameter, 6 inches long)
- 4 washers (1/2 inch diameter)
- 4 nuts (1/2 inch diameter)
- 1 piece of plywood (4 feet by 8 feet, 3/4 inch thick)
- 12 wood screws (3 inches long)
Tools List
- Drill
- 1/2 inch drill bit
- Wrench
- Circular saw
- Screwdriver
- Measuring tape
- Level
Step-by-Step Instructions
- Cut the steel pipes into four equal lengths of 2 feet each.
- Drill a 1/2 inch hole through the center of each steel plate.
- Insert the bolts through the holes in the steel plates and secure them with washers and nuts.
- Attach the steel pipes to the steel plates by inserting the ends of the pipes into the holes in the plates and securing them with bolts, washers, and nuts.
- Flip the rotisserie upside down and attach the casters to the bottom of the steel plates.
- Cut the plywood into two pieces, each measuring 2 feet by 4 feet.
- Attach the plywood pieces to the top of the rotisserie by screwing them into the steel pipes.
Tips
- Make sure to use heavy-duty casters that are rated for at least 1,000 pounds each. This will ensure that the rotisserie can support the weight of a car body.
- Use a level to make sure that the rotisserie is level before you attach the car body.
- Be careful when rotating the car body on the rotisserie. Use a slow and steady motion to avoid damaging the car body.
- If you are not comfortable making your own rotisserie, you can purchase a commercial rotisserie from a automotive equipment supplier.
Conclusion
Building your own car body rotisserie is a great way to save money and get the job done right. By following the instructions in this guide, you can build a rotisserie that will meet your needs and help you complete your car body project.