How to Make a Car Body Rotisserie

A car body rotisserie is a great tool for working on your car’s body. It allows you to rotate the body so that you can access all of the areas you need to work on. This can make it much easier to paint, repair, or modify your car’s body.

If you’re looking to build your own car body rotisserie, there are a few things you’ll need to do.

Materials

• 4 pieces of 2×4 lumber, each 8 feet long
• 4 pieces of 2×6 lumber, each 8 feet long
• 1 piece of plywood, 4 feet by 8 feet
• 12 bolts, 1/2 inch by 6 inches
• 12 washers, 1/2 inch
• 12 nuts, 1/2 inch
• 4 casters, 4 inches in diameter
• 1 swivel, 1/2 inch
• 1 chain, 10 feet long
• 1 hook, 1/2 inch

Instructions

1. Cut the 2×4 lumber into the following lengths:
   • 4 pieces, each 4 feet long
   • 4 pieces, each 2 feet long
2. Cut the 2×6 lumber into the following lengths:
   • 2 pieces, each 8 feet long
   • 2 pieces, each 4 feet long
3. Assemble the frame of the rotisserie by attaching the 2×4 lumber to the 2×6 lumber using the bolts, washers, and nuts. The frame should look like a rectangle with two legs on each side.
4. Attach the plywood to the top of the frame using the screws. The plywood will serve as the platform for the car body.
5. Attach the casters to the bottom of the legs. The casters will allow you to move the rotisserie around easily.
6. Attach the swivel to the center of the frame. The swivel will allow you to rotate the car body.
7. Attach the chain to the hook. The chain will be used to hoist the car body onto the rotisserie.
8. To use the rotisserie, simply hoist the car body onto the platform and secure it with the chain. You can then rotate the car body to access any area you need to work on.

Tips

• You can use a variety of materials to build your car body rotisserie. The materials listed above are just a suggestion. You can use whatever materials you have available.
• Be sure to make the rotisserie strong enough to support the weight of your car body. You don’t want the rotisserie to collapse while you’re working on your car.
• Make sure the casters are large enough to support the weight of your car body. You don’t want the casters to break while you’re moving the rotisserie.
• Be careful when rotating the car body. You don’t want to damage the car body or the rotisserie.

Conclusion

Building a car body rotisserie is a great way to make it easier to work on your car’s body. With a little time and effort, you can build a rotisserie that will save you time and money in the long run.