How to Make a Custom RC Car Body

Materials You’ll Need

• RC car chassis
• Lexan or polycarbonate sheet
• Scissors
• Hobby knife
• Ruler or measuring tape
• Pencil or pen
• Masking tape
• Body paint
• Clear coat

Step-by-Step Instructions

1. Design Your Body

The first step is to design your body. You can either draw it out on paper or use a computer-aided design (CAD) program. If you’re not sure where to start, there are plenty of templates available online.

Once you have a design, you need to trace it onto the Lexan or polycarbonate sheet. Be sure to use a pencil or pen that will not smudge or bleed through the plastic.

2. Cut Out the Body

Once you have the design traced, you can cut out the body. Use a sharp hobby knife and be careful not to cut yourself. Make sure to cut along the inside of the lines so that your body is slightly smaller than the design.

3. Trim the Body

Once the body is cut out, you need to trim it so that it fits properly on the chassis. Use a ruler or measuring tape to measure the distance between the wheelbase and the front and rear axles. Then, use a hobby knife to trim the body to size.

4. Mount the Body

Once the body is trimmed, you can mount it on the chassis. Use body posts or screws to secure the body in place. Make sure to use a little bit of glue to help hold the body in place.

5. Paint the Body

Once the body is mounted, you can paint it. You can use any type of paint that you want, but most people use automotive paint. Apply several thin coats of paint, allowing each coat to dry completely before applying the next.

6. Clear Coat the Body

Once the paint is dry, you can apply a clear coat to protect it. Clear coat will help to keep the paint from chipping or peeling. Apply several thin coats of clear coat, allowing each coat to dry completely before applying the next.

7. Finish the Body

Once the clear coat is dry, you can finish the body by adding decals or other details. You can also use a heat gun to slightly warp the body to give it a more realistic look.

Tips for Making a Custom RC Car Body

* Use high-quality materials. The better the materials you use, the better your body will look and perform.
* Be patient. Making a custom RC car body takes time and effort. Don’t rush the process and take your time to do it right.
* Have fun! Making a custom RC car body should be a fun and rewarding experience. Don’t be afraid to experiment and try new things.

Conclusion

Making a custom RC car body is a great way to personalize your car and make it stand out from the crowd. With a little time and effort, you can create a body that is both unique and stylish.