How to Make Holes in RC Car Body
Introduction
Making holes in RC car bodies is a common task that can be necessary for a variety of reasons, such as adding body posts, mounting electronics, or creating custom air vents. While it may seem like a daunting task, making holes in RC car bodies is actually quite easy with the right tools and technique.
Tools You Will Need
- Drill
- Drill bits
- Safety glasses
- Dust mask
- Center punch
- Measuring tape or ruler
- Pencil or marker
Safety First
Before you begin, it is important to take some safety precautions. Always wear safety glasses and a dust mask when drilling to protect your eyes and lungs from flying debris. It is also a good idea to work in a well-ventilated area.
Step-by-Step Instructions
- Mark the hole location. Use a pencil or marker to mark the location of the hole you want to make. If you are adding body posts, use the measurements from the body post mounting kit to determine the correct location.
- Center punch the hole location. This will create a small indentation in the plastic that will help to keep the drill bit from wandering.
- Select the correct drill bit. The size of the drill bit you need will depend on the size of the hole you want to make. For most applications, a 1/16-inch or 3/32-inch drill bit will be sufficient.
- Drill the hole. Hold the drill perpendicular to the body and slowly drill the hole. Apply gentle pressure and let the drill do the work. Do not force the drill, as this can cause the plastic to crack.
- Deburr the hole. Once you have drilled the hole, use a deburring tool or a small file to remove any sharp edges from the hole.
- Use a sharp drill bit. A dull drill bit will be more likely to wander and cause the plastic to crack.
- Drill slowly and apply gentle pressure. Forcing the drill can cause the plastic to crack.
- If you are drilling a hole near a delicate part of the body, use a backing plate to support the plastic and prevent it from cracking.
- Practice on a scrap piece of plastic before drilling the hole in your RC car body.
Conclusion
Making holes in RC car bodies is a simple task with the right tools and technique. By following the steps outlined in this article, you can easily create custom holes in your RC car body to mount body posts, electronics, or create custom air vents.
