How to Measure RC Car Body

Introduction

Measuring the body of an RC car is an important step in ensuring that it fits properly on the chassis and that it is properly aligned. There are a few different ways to measure an RC car body, and the method you choose will depend on the specific body you are working with.

Using a Tape Measure

The most common way to measure an RC car body is to use a tape measure. To do this, simply place the tape measure along the edge of the body, starting at the front and ending at the back. Be sure to measure the body from the outside edge, as this will give you the most accurate measurement.

When using a tape measure, it is important to make sure that the tape is taut and that you are measuring in a straight line. If the tape is not taut, you will get an inaccurate measurement. If you are measuring in a curved line, you will need to take multiple measurements and then average them together.

Using a Calipers

Calipers are another option for measuring an RC car body. Calipers are more precise than a tape measure, but they can also be more difficult to use. To use calipers, simply open the jaws of the calipers and place them against the edge of the body. Then, close the jaws until they are snug against the body. The measurement will be displayed on the calipers.

When using calipers, it is important to make sure that the jaws are parallel to the edge of the body. If the jaws are not parallel, you will get an inaccurate measurement.

Using a Laser Scanner

Laser scanners are the most accurate way to measure an RC car body. Laser scanners use a laser to scan the surface of the body and create a 3D model. This model can then be used to measure the body’s dimensions.

Laser scanners are typically used by professionals, as they are expensive and require specialized training to operate. However, if you are looking for the most accurate way to measure an RC car body, a laser scanner is the best option.

Conclusion

There are a few different ways to measure an RC car body. The method you choose will depend on the specific body you are working with and the level of accuracy you need. If you are looking for a simple and easy way to measure an RC car body, a tape measure is a good option. If you need a more precise measurement, calipers or a laser scanner are better choices.