Contents
How to Push Start a Manual Transmission Car
Introduction
If your car’s battery dies, you can push start it to get it going again. This is a simple process that can be done with the help of another car.
Materials
- Another car with a working battery
- Jumper cables
Safety Precautions
- Park both cars in a safe location, away from traffic.
- Set the parking brake on both cars.
- Turn off the engines of both cars.
- Connect the jumper cables according to the manufacturer’s instructions.
- Wear eye protection when connecting and disconnecting the jumper cables.
Steps
- Put the dead car in neutral.
- Have the other car push the dead car until it is moving at about 5 mph.
- Once the dead car is moving, depress the clutch pedal and put the car in second gear.
- Slowly release the clutch pedal while giving the car gas. The engine should start.
- Once the engine is started, keep the car in gear and drive it for a few minutes to recharge the battery.
- Disconnect the jumper cables and thank the other driver for their help.
Tips
- If the car does not start after a few attempts, check the connections on the jumper cables.
- Do not try to push start a car with an automatic transmission.
- If you are not comfortable push starting a car, call a tow truck.
Conclusion
Push starting a manual transmission car is a simple process that can be done with the help of another car. By following the steps outlined in this article, you can get your dead car started and back on the road in no time.
