How to Remove Badges from Car Body
Introduction
Badges are often used to add a touch of personalization to a car, but over time they can become faded, damaged, or simply out of style. If you’re looking to remove a badge from your car, there are a few different methods you can use. In this post, we’ll walk you through each method step-by-step, so you can easily remove any badges you don’t want.
Before You Start
Before you start removing badges from your car, it’s important to gather a few supplies. You’ll need:
* A clean cloth
* A plastic pry bar or putty knife
* A hair dryer or heat gun
* Goo Gone or another adhesive remover
* Rubbing alcohol
* Wax or polish
Once you have all of your supplies, you’re ready to start removing badges.
Method 1: Using a Plastic Pry Bar or Putty Knife
This is the most common method for removing badges from cars. It’s simple and doesn’t require any special tools.
1. Prepare the area. Clean the area around the badge with a clean cloth. This will help to prevent any dirt or debris from getting into the paint when you remove the badge.
2. Insert the pry bar or putty knife. Carefully insert the pry bar or putty knife under the edge of the badge. Be careful not to scratch the paint.
3. Pry the badge off. Gently pry the badge off the car. If the badge is particularly stubborn, you may need to use a little more force.
4. Remove any adhesive residue. Once the badge is removed, there may be some adhesive residue left on the car. To remove this residue, use a cloth dampened with Goo Gone or another adhesive remover.
5. Clean the area. Once the adhesive residue is removed, clean the area with a clean cloth and rubbing alcohol. This will help to remove any remaining dirt or debris.
6. Wax or polish the area. Once the area is clean, apply a coat of wax or polish to protect the paint.
Method 2: Using a Hair Dryer or Heat Gun
This method is a little more dangerous than using a pry bar or putty knife, but it can be more effective on badges that are particularly stubborn.
1. Prepare the area. Clean the area around the badge with a clean cloth. This will help to prevent any dirt or debris from getting into the paint when you remove the badge.
2. Heat the badge. Use a hair dryer or heat gun to heat the badge. This will soften the adhesive and make it easier to remove.
3. Pry the badge off. Once the badge is heated, carefully pry it off the car. Be careful not to burn yourself or damage the paint.
4. Remove any adhesive residue. Once the badge is removed, there may be some adhesive residue left on the car. To remove this residue, use a cloth dampened with Goo Gone or another adhesive remover.
5. Clean the area. Once the adhesive residue is removed, clean the area with a clean cloth and rubbing alcohol. This will help to remove any remaining dirt or debris.
6. Wax or polish the area. Once the area is clean, apply a coat of wax or polish to protect the paint.
Method 3: Using a Chemical Adhesive Remover
This method is the most dangerous, but it can be the most effective on badges that are particularly stubborn.
1. Prepare the area. Clean the area around the badge with a clean cloth. This will help to prevent any dirt or debris from getting into the paint when you remove the badge.
2. Apply the chemical adhesive remover. Apply a small amount of chemical adhesive remover to a cloth. Be careful not to get any of the remover on the paint.
3. Let the remover sit. Allow the remover to sit on the badge for a few minutes. This will give the remover time to dissolve the adhesive.
4. Pry the badge off. Once the adhesive has been dissolved, carefully pry the badge off the car. Be careful not to damage the paint.
5. Clean the area. Once the badge is removed, clean the area with a clean cloth and rubbing alcohol. This will help to remove any remaining dirt or debris.
6. Wax or polish the area. Once the area is clean, apply a coat of wax or polish to protect the paint.
Tips for Removing Badges from Cars
Here are a few tips for removing badges from cars:
* Use a plastic pry bar or putty knife. This is the safest method for removing badges.
* Be careful not to scratch the paint. When using a pry bar or putty knife, be careful not to scratch the paint.
* Use a hair dryer or heat gun on stubborn badges. If a badge is particularly stubborn, you can use a hair dryer or heat gun to soften the adhesive.
* Use a chemical adhesive remover as a last resort. Chemical adhesive removers are the most dangerous method for removing badges, but they can be the most effective on stubborn badges.
* Wax or polish the area after removing the badge. Once the badge is removed, wax or polish the area to protect the paint.
Conclusion
Removing badges from cars is a simple task that can be done with a few basic tools. By following the steps in this post, you can easily remove any badges you don’t want, and restore your car to its original appearance.