Contents
How to Remove Double Side Tape from Car Body
Double side tape is a strong adhesive that is often used to attach items to car bodies. However, it can be difficult to remove, and if not done properly, can damage the paintwork.
In this guide, we will show you how to remove double side tape from a car body safely and effectively.
Materials You Will Need
- Heat gun or hair dryer
- Plastic scraper or credit card
- Goo Gone or other adhesive remover
- Clean cloths
Step-by-Step Instructions
- Heat the tape. Use a heat gun or hair dryer to heat the tape until it becomes soft and pliable. This will make it easier to remove.
- Scrape off the tape. Use a plastic scraper or credit card to gently scrape off the tape. Be careful not to scratch the paintwork.
- Apply adhesive remover. Apply a small amount of Goo Gone or other adhesive remover to a clean cloth. Wipe the area where the tape was removed to remove any remaining adhesive.
- Rinse with water. Rinse the area with clean water to remove any residue from the adhesive remover.
- Dry the area. Dry the area with a clean cloth.
Tips
- Start by heating a small area of the tape to see how it reacts to the heat.
- Be patient and take your time when removing the tape.
- If you are having trouble removing the tape, you can try using a stronger adhesive remover.
- Do not use sharp objects to remove the tape, as this could damage the paintwork.
- If you are removing tape from a painted surface, be sure to thoroughly clean the area afterwards to remove any residue.
Conclusion
By following these steps, you can safely and effectively remove double side tape from a car body. Just remember to be patient and take your time, and you will be able to get the job done without damaging the paintwork.
