RC Car Lexan Body Paint: A Comprehensive Guide
Lexan is a lightweight, durable plastic that is commonly used for the bodies of RC cars. It is a great material for painting, as it is easy to work with and can create a variety of different looks. In this guide, we will cover everything you need to know about painting lexan RC car bodies, including the different types of paint, the tools you will need, and the steps involved in the painting process.
Types of Paint
There are two main types of paint that can be used on lexan RC car bodies: acrylic paint and enamel paint. Acrylic paint is water-based and is easy to apply. It is also relatively inexpensive. However, acrylic paint is not as durable as enamel paint and can be scratched or peeled off easily.
Enamel paint is oil-based and is more durable than acrylic paint. It is also more difficult to apply and requires a longer drying time. However, enamel paint is more resistant to scratches and peeling.
Tools You Will Need
In addition to paint, you will also need the following tools to paint a lexan RC car body:
- A spray gun or airbrush
- A compressor
- Masking tape
- Sandpaper
- Primer
- Clear coat
Steps Involved in the Painting Process
The following are the steps involved in the painting process:
- Prepare the body: The first step is to prepare the body for painting. This involves cleaning the body with soap and water and then sanding it lightly with sandpaper to create a smooth surface.
- Apply primer: Once the body is prepared, you will need to apply primer. Primer helps to create a smooth surface and provides a good base for the paint.
- Mask the body: Once the primer is dry, you will need to mask the body. This involves applying masking tape to the areas of the body that you do not want to paint.
- Apply paint: Once the body is masked, you can begin to apply paint. You can use a spray gun or an airbrush to apply the paint. Be sure to apply thin, even coats of paint.
- Remove the masking tape: Once the paint is dry, you can remove the masking tape. Be careful not to peel the paint off with the tape.
- Apply clear coat: The final step is to apply clear coat. Clear coat helps to protect the paint from scratches and peeling.
Tips for Painting Lexan RC Car Bodies
Here are a few tips for painting lexan RC car bodies:
- Use a light touch when sanding the body. You do not want to sand through the lexan.
- Apply primer in thin, even coats. Do not apply too much primer, or it will create a rough surface.
- Mask the body carefully. Be sure to cover all of the areas that you do not want to paint.
- Apply paint in thin, even coats. Do not apply too much paint, or it will run.
- Allow the paint to dry completely before removing the masking tape.
- Apply clear coat in thin, even coats. Do not apply too much clear coat, or it will create a cloudy finish.
Conclusion
Painting lexan RC car bodies is a relatively easy process that can be done at home with the right tools and materials. By following the steps outlined in this guide, you can create a custom-painted RC car body that will look great and perform well on the track.
