Remove Paint Lexan RC Car Body
Materials You’ll Need
- Denatured alcohol
- Soft cloths or rags
- Cotton swabs
- Plastic scraper (optional)
Step-by-Step Instructions
1. Safety First
Before you start, put on gloves and safety glasses to protect yourself from the chemicals you’ll be using. Make sure you’re working in a well-ventilated area.
2. Prepare the Lexan Body
Remove any decals or stickers from the Lexan body. Then, use a soft cloth or rag to wipe down the body to remove any dirt or debris.
3. Apply Denatured Alcohol
Pour a small amount of denatured alcohol onto a soft cloth or rag. Dab the cloth onto the painted area and let it sit for a few minutes. The alcohol will start to soften the paint.
4. Scrape Off the Paint
Using a plastic scraper, carefully scrape off the softened paint. Be gentle so you don’t damage the Lexan body. You may need to apply more alcohol and scrape off the paint in several passes.
5. Clean Up
Once you’ve scraped off all the paint, use a clean cloth or rag to wipe down the Lexan body to remove any remaining alcohol or paint residue. Let the body dry completely before reassembling your RC car.
Tips
- If the paint is particularly stubborn, you can try using a stronger solvent, such as acetone. However, be sure to test the solvent on a small area first to make sure it doesn’t damage the Lexan body.
- If you’re using a plastic scraper, be careful not to scratch the Lexan body.
- Be patient and take your time. Removing paint from Lexan can be a time-consuming process, but it’s important to do it carefully to avoid damaging the body.
Conclusion
Removing paint from a Lexan RC car body is a relatively straightforward process. By following the steps outlined above, you can safely and effectively remove the paint without damaging the body.
