2000 Lincoln Town Car Transmission Cable Replacement Guide
Introduction
The transmission cable on a 2000 Lincoln Town Car is responsible for shifting the gears in the transmission. If the transmission cable is damaged or worn, it can cause the transmission to shift gears improperly, which can lead to a variety of problems.
In this guide, we will show you how to replace the transmission cable on a 2000 Lincoln Town Car. This is a relatively simple repair that can be completed in about an hour.
Tools and Materials
You will need the following tools and materials to replace the transmission cable:
* New transmission cable
* 10mm socket wrench
* 13mm socket wrench
* Ratchet
* Flathead screwdriver
* Phillips head screwdriver
Safety First
Before you begin any work on your Lincoln Town Car, be sure to take the following safety precautions:
* Park the car on a level surface and engage the parking brake.
* Allow the engine to cool down before beginning work.
* Disconnect the negative battery terminal.
Step-by-Step Instructions
1. Remove the air cleaner housing.
The air cleaner housing is located on the top of the engine. It is held in place by two 10mm bolts. Use a 10mm socket wrench to remove the bolts and then lift the air cleaner housing off of the engine.
2. Remove the bracket that holds the transmission cable in place.
The bracket that holds the transmission cable in place is located on the side of the transmission. It is held in place by two 13mm bolts. Use a 13mm socket wrench to remove the bolts and then remove the bracket.
3. Disconnect the transmission cable from the transmission.
The transmission cable is connected to the transmission by a small clip. Use a flathead screwdriver to pry the clip open and then disconnect the transmission cable from the transmission.
4. Disconnect the transmission cable from the throttle body.
The transmission cable is connected to the throttle body by a small bracket. Use a Phillips head screwdriver to remove the screw that holds the bracket in place and then disconnect the transmission cable from the throttle body.
5. Remove the transmission cable from the car.
Once the transmission cable is disconnected from the transmission and the throttle body, you can remove it from the car. To do this, simply pull the cable out of the firewall.
6. Install the new transmission cable.
To install the new transmission cable, simply reverse the steps that you followed to remove the old cable.
7. Test the transmission cable.
Once the new transmission cable is installed, test it by shifting the gears. The transmission should now shift gears smoothly and without any problems.
Conclusion
Replacing the transmission cable on a 2000 Lincoln Town Car is a relatively simple repair that can be completed in about an hour. By following the steps in this guide, you can save yourself the cost of having the repair done by a mechanic.
