2000 Lincoln Town Car Transmission Fluid Filter and Fluid Change
Introduction
The transmission fluid filter in your 2000 Lincoln Town Car is responsible for removing contaminants from the transmission fluid. Over time, the filter can become clogged with debris, which can restrict the flow of fluid and cause the transmission to overheat. Changing the transmission fluid filter is a relatively simple and inexpensive maintenance procedure that can help to extend the life of your transmission.
Symptoms of a Clogged Transmission Fluid Filter
There are a few symptoms that may indicate that your transmission fluid filter is clogged, including:
*
- Slipping gears
- Hard shifting
- Delayed engagement
- Overheating transmission
How to Change the Transmission Fluid Filter
Changing the transmission fluid filter is a relatively simple procedure that can be completed in about an hour. You will need the following tools and materials:
*
- New transmission fluid filter
- Transmission fluid
- Funnel
- Wrench
- Drain pan
To change the transmission fluid filter, follow these steps:
1. Safety first: Park your car on a level surface and engage the parking brake. Allow the engine to cool completely before starting any work.
2. Locate the transmission fluid pan: The transmission fluid pan is located at the bottom of the transmission. It is typically held in place by several bolts.
3. Drain the transmission fluid: Place the drain pan under the transmission fluid pan. Loosen the bolts that hold the pan in place and allow the fluid to drain out.
4. Remove the transmission fluid pan: Once the fluid has drained out, remove the bolts that hold the pan in place and remove the pan.
5. Locate the transmission fluid filter: The transmission fluid filter is located inside the transmission fluid pan. It is typically held in place by a few bolts.
6. Remove the transmission fluid filter: Loosen the bolts that hold the filter in place and remove the filter.
7. Install the new transmission fluid filter: Place the new filter in the transmission fluid pan and tighten the bolts that hold it in place.
8. Reinstall the transmission fluid pan: Place the transmission fluid pan back on the transmission and tighten the bolts that hold it in place.
9. Add new transmission fluid: Use a funnel to add new transmission fluid to the transmission. Add fluid until the level reaches the “full” mark on the dipstick.
10. Check for leaks: Start the engine and check for leaks. If there are no leaks, you are finished.
How Often Should You Change the Transmission Fluid Filter?
The transmission fluid filter should be changed every 30,000 to 60,000 miles, or as recommended by your car’s manufacturer. If you drive in severe conditions, such as towing or driving in dusty or muddy areas, you may need to change the filter more often.
Benefits of Changing the Transmission Fluid Filter
Changing the transmission fluid filter has a number of benefits, including:
*
- Extends the life of the transmission
- Improves transmission performance
- Reduces the risk of transmission failure
- Saves you money on repairs
Conclusion
Changing the transmission fluid filter is a relatively simple and inexpensive maintenance procedure that can help to extend the life of your transmission. If you are experiencing any of the symptoms of a clogged transmission fluid filter, be sure to have it changed as soon as possible.
