2003 Lincoln Town Car Transmission Filter Change

Tools and Materials Needed

• 10mm socket wrench
• 13mm socket wrench
• 15mm socket wrench
• 17mm socket wrench
• 24mm socket wrench
• Flathead screwdriver
• Phillips head screwdriver
• Transmission pan gasket
• Transmission filter
• Transmission fluid

Step-by-Step Instructions

1. Safety First

Before you begin, park your car on a level surface and engage the parking brake. Allow the engine to cool down completely.

2. Locate the Transmission Pan

The transmission pan is located at the bottom of the transmission. It is a large, metal pan that is held in place by bolts.

3. Remove the Transmission Pan Bolts

Use a 10mm socket wrench to remove the bolts that hold the transmission pan in place. There are a total of 16 bolts.

4. Carefully Remove the Transmission Pan

Once the bolts are removed, carefully remove the transmission pan. Be careful not to spill any transmission fluid

5. Replace the Transmission Filter

The transmission filter is located inside the transmission pan. It is a small, cylindrical-shaped filter that is held in place by a clip. Use a flathead screwdriver to remove the clip and then pull out the filter.

Insert the new filter into the transmission pan and secure it with the clip.

6. Clean the Transmission Pan

Use a rag to clean the transmission pan. Be sure to remove all of the old transmission fluid and debris.

7. Install the New Transmission Pan Gasket

Apply a thin bead of transmission fluid to the new transmission pan gasket. Then, place the gasket on the transmission pan.

8. Reinstall the Transmission Pan

Carefully place the transmission pan back on the transmission. Be sure to align the gasket properly. Then, tighten the bolts to 10 ft-lbs.

9. Add New Transmission Fluid

Use a funnel to add new transmission fluid to the transmission. Add fluid until the dipstick reads full.

10. Start the Engine and Check for Leaks

Start the engine and allow it to idle for a few minutes. Then, check for any leaks. If there are no leaks, the transmission filter change is complete.

Tips

• Use new transmission fluid and a new transmission filter. This will help to ensure that your transmission operates properly.
• Tighten the transmission pan bolts to the correct torque specifications. This will help to prevent leaks.
• If you are not comfortable changing the transmission filter yourself, take your car to a qualified mechanic.

Conclusion

Changing the transmission filter is a relatively simple task that can be completed in about an hour. By following these step-by-step instructions, you can save yourself time and money.