2004 Ford Escape Transmission Fluid Change: High Mileage Car
Introduction
The 2004 Ford Escape is a popular SUV that has been on the market for many years. Over time, the transmission fluid in your Escape will need to be changed. This is especially important if you have a high mileage car. Changing the transmission fluid will help to keep your transmission running smoothly and prevent costly repairs down the road.
What Type of Transmission Fluid Do I Need?
The type of transmission fluid you need will depend on the year of your Escape. For 2004 models, you will need to use Mercon V transmission fluid. You can find this fluid at most auto parts stores.
How Often Should I Change the Transmission Fluid?
Ford recommends changing the transmission fluid in your Escape every 30,000 miles. However, if you have a high mileage car, you may need to change it more often. If you are unsure how often to change the transmission fluid, you can consult with a mechanic.
Tools and Materials You Will Need
* New transmission fluid
* Funnel
* Drain pan
* Rags
Step-by-Step Instructions
1. Gather your tools and materials. Make sure you have everything you need before you start.
2. Park your Escape on a level surface. This will make it easier to drain the transmission fluid.
3. Turn off the engine and allow it to cool. The transmission fluid can be hot, so it is important to let it cool before you start working on it.
4. Locate the transmission fluid drain plug. The drain plug is usually located on the bottom of the transmission pan.
5. Place the drain pan under the transmission fluid drain plug. This will catch the fluid as it drains out.
6. Loosen the drain plug using a wrench. Be careful not to overtighten the plug.
7. Allow the transmission fluid to drain out. This may take a few minutes.
8. Once the transmission fluid has drained out, tighten the drain plug.
9. Locate the transmission fluid fill plug. The fill plug is usually located on the side of the transmission pan.
10. Insert the funnel into the transmission fluid fill plug.
11. Add new transmission fluid to the transmission. Add fluid until it reaches the full mark on the dipstick.
12. Remove the funnel and tighten the fill plug.
13. Start the engine and let it run for a few minutes. This will circulate the new transmission fluid throughout the transmission.
14. Check the transmission fluid level. Add more fluid if necessary.
Tips
* If you are not comfortable changing the transmission fluid yourself, you can have it done by a mechanic.
* Changing the transmission fluid is a relatively simple task that can be done in about an hour.
* Changing the transmission fluid regularly will help to keep your transmission running smoothly and prevent costly repairs down the road.
Conclusion
Changing the transmission fluid in your 2004 Ford Escape is an important part of maintaining your vehicle. By following the steps outlined in this guide, you can safely and easily change the transmission fluid in your Escape.
