2008 smart car transmission fluid change




2008 Smart Car Transmission Fluid Change

2008 Smart Car Transmission Fluid Change

Introduction

The transmission fluid in your 2008 Smart Car is responsible for lubricating the moving parts of the transmission, cooling them down, and protecting them from wear and tear. Over time, the transmission fluid can become dirty and contaminated, which can lead to problems with the transmission. That’s why it’s important to change the transmission fluid on a regular basis.

How Often Should You Change the Transmission Fluid?

The recommended interval for changing the transmission fluid in a 2008 Smart Car is every 60,000 miles. However, you may need to change it more often if you drive in stop-and-go traffic or tow heavy loads.

What Type of Transmission Fluid Should You Use?

When changing the transmission fluid in your 2008 Smart Car, it’s important to use the correct type of fluid. The recommended fluid is Mercedes-Benz ATF 134.

Tools and Materials You’ll Need

To change the transmission fluid in your 2008 Smart Car, you’ll need the following tools and materials:

* 10mm socket wrench
* 13mm socket wrench
* 17mm socket wrench
* Drain pan
* Funnels
* Transmission fluid
* New transmission filter
* Rags

Step-by-Step Instructions

1. Park your Smart Car on a level surface and engage the parking brake.
2. Locate the transmission fluid drain plug. It’s located on the bottom of the transmission pan.
3. Place the drain pan under the drain plug.
4. Use the 17mm socket wrench to loosen the drain plug.
5. Allow the transmission fluid to drain into the drain pan.
6. Once the transmission fluid has drained, replace the drain plug.
7. Locate the transmission fluid filter. It’s located on the side of the transmission pan.
8. Use the 10mm socket wrench to loosen the filter bolts.
9. Remove the transmission filter and replace it with a new one.
10. Tighten the filter bolts.
11. Add new transmission fluid to the transmission pan.
12. Use the 13mm socket wrench to tighten the fill plug.
13. Start your Smart Car and let it run for a few minutes.
14. Check the transmission fluid level and add more fluid if necessary.

Tips

* It’s important to use the correct type of transmission fluid for your Smart Car. The recommended fluid is Mercedes-Benz ATF 134.
* If you’re not comfortable changing the transmission fluid yourself, you can have it done at a mechanic.
* Changing the transmission fluid on a regular basis will help to keep your Smart Car running smoothly and efficiently.


Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: